Gecko [ edgpens.lpkmn.gov.my ]

Name	Size	Permission
SOAPsh.bat	3.35 KB	-rwxrwxrwx
SOAPsh.pl	2.75 KB	-rw-rw-rw-
bdf2gdfont.bat	5.26 KB	-rwxrwxrwx
bdf2gdfont.pl	4.75 KB	-rw-rw-rw-
chartex	5.67 KB	-rw-rw-rw-
chartex.bat	6.47 KB	-rwxrwxrwx
config_data	7.2 KB	-rw-rw-rw-
config_data.bat	7.73 KB	-rwxrwxrwx
corelist	14.63 KB	-rw-rw-rw-
corelist.bat	15.95 KB	-rwxrwxrwx
cpan	8.06 KB	-rw-rw-rw-
cpan-mirrors	4.18 KB	-rw-rw-rw-
cpan-mirrors.bat	5.1 KB	-rwxrwxrwx
cpan-outdated	8.85 KB	-rw-rw-rw-
cpan-outdated.bat	9.67 KB	-rwxrwxrwx
cpan.bat	9.16 KB	-rwxrwxrwx
cpan2dist	21.22 KB	-rw-rw-rw-
cpan2dist.bat	22.39 KB	-rwxrwxrwx
cpandb	6.6 KB	-rw-rw-rw-
cpandb.bat	7.37 KB	-rwxrwxrwx
cpanel_json_xs	9.75 KB	-rw-rw-rw-
cpanel_json_xs.bat	10.58 KB	-rwxrwxrwx
cpanm	295.67 KB	-rw-rw-rw-
cpanm.bat	297.23 KB	-rwxrwxrwx
cpanp	3.22 KB	-rw-rw-rw-
cpanp-run-perl	459 B	-rw-rw-rw-
cpanp-run-perl.bat	990 B	-rwxrwxrwx
cpanp.bat	3.84 KB	-rwxrwxrwx
crc32	1.01 KB	-rw-rw-rw-
crc32.bat	1.57 KB	-rwxrwxrwx
dbicadmin	7 KB	-rw-rw-rw-
dbicadmin.bat	7.87 KB	-rwxrwxrwx
dbilogstrip	1.39 KB	-rw-rw-rw-
dbilogstrip.bat	1.89 KB	-rwxrwxrwx
dbiprof	6.31 KB	-rw-rw-rw-
dbiprof.bat	6.82 KB	-rwxrwxrwx
dbiproxy	5.44 KB	-rw-rw-rw-
dbiproxy.bat	5.95 KB	-rwxrwxrwx
enc2xs	40.68 KB	-rw-rw-rw-
enc2xs.bat	42.87 KB	-rwxrwxrwx
encguess	2.9 KB	-rw-rw-rw-
encguess.bat	3.8 KB	-rwxrwxrwx
exe_update.bat	4.71 KB	-rwxrwxrwx
exe_update.pl	4.05 KB	-rw-rw-rw-
exetype.bat	3.53 KB	-rwxrwxrwx
extract_vba	2.98 KB	-rw-rw-rw-
extract_vba.bat	3.62 KB	-rwxrwxrwx
factor.bat	3.77 KB	-rwxrwxrwx
factor.pl	3.16 KB	-rw-rw-rw-
findrule	3.24 KB	-rw-rw-rw-
findrule.bat	3.88 KB	-rwxrwxrwx
h2ph.bat	30.27 KB	-rwxrwxrwx
h2xs.bat	62.43 KB	-rwxrwxrwx
htmltree	1.28 KB	-rw-rw-rw-
htmltree.bat	1.81 KB	-rwxrwxrwx
hypnotoad	1.03 KB	-rw-rw-rw-
hypnotoad.bat	1.58 KB	-rwxrwxrwx
instmodsh	4.09 KB	-rw-rw-rw-
instmodsh.bat	5.03 KB	-rwxrwxrwx
json_pp	4.77 KB	-rw-rw-rw-
json_pp.bat	5.78 KB	-rwxrwxrwx
json_xs	6.84 KB	-rw-rw-rw-
json_xs.bat	7.6 KB	-rwxrwxrwx
libgcc_s_seh-1.dll	74.5 KB	-rw-rw-rw-
libnetcfg.bat	16.88 KB	-rwxrwxrwx
libstdc++-6.dll	1.36 MB	-rw-rw-rw-
libwinpthread-1.dll	51 KB	-rw-rw-rw-
llw32helper.bat	4.8 KB	-rwxrwxrwx
llw32helper.pl	4.13 KB	-rw-rw-rw-
lwp-download	10.04 KB	-rw-rw-rw-
lwp-download.bat	10.88 KB	-rwxrwxrwx
lwp-dump	2.64 KB	-rw-rw-rw-
lwp-dump.bat	3.26 KB	-rwxrwxrwx
lwp-mirror	2.35 KB	-rw-rw-rw-
lwp-mirror.bat	2.96 KB	-rwxrwxrwx
lwp-request	15.81 KB	-rw-rw-rw-
lwp-request.bat	16.88 KB	-rwxrwxrwx
mech-dump	4.74 KB	-rw-rw-rw-
mech-dump.bat	5.44 KB	-rwxrwxrwx
minicpan	5.36 KB	-rw-rw-rw-
minicpan.bat	6.05 KB	-rwxrwxrwx
module-version	2.06 KB	-rw-rw-rw-
module-version.bat	2.65 KB	-rwxrwxrwx
mojo	408 B	-rw-rw-rw-
mojo.bat	953 B	-rwxrwxrwx
moose-outdated	427 B	-rw-rw-rw-
moose-outdated.bat	977 B	-rwxrwxrwx
morbo	2.15 KB	-rw-rw-rw-
morbo.bat	2.72 KB	-rwxrwxrwx
nssm_32.exe	288 KB	-rwxrwxrwx
nssm_64.exe	323.5 KB	-rwxrwxrwx
package-stash-conflicts	1.02 KB	-rw-rw-rw-
package-stash-conflicts.bat	1.59 KB	-rwxrwxrwx
parinstallppd	3.35 KB	-rw-rw-rw-
parinstallppd.bat	3.99 KB	-rwxrwxrwx
perl.exe	39 KB	-rwxrwxrwx
perl5.32.0.exe	39 KB	-rwxrwxrwx
perl532.dll	3.26 MB	-rw-rw-rw-
perlbug.bat	46.8 KB	-rwxrwxrwx
perldoc.bat	1016 B	-rwxrwxrwx
perlglob.bat	1.95 KB	-rwxrwxrwx
perlglob.exe	17 KB	-rwxrwxrwx
perlivp.bat	11.72 KB	-rwxrwxrwx
perlthanks.bat	46.8 KB	-rwxrwxrwx
perltidy	154.37 KB	-rw-rw-rw-
perltidy.bat	158.88 KB	-rwxrwxrwx
pgplet	10.37 KB	-rw-rw-rw-
pgplet.bat	11.22 KB	-rwxrwxrwx
piconv	8.07 KB	-rw-rw-rw-
piconv.bat	9.13 KB	-rwxrwxrwx
pkg-config	46.96 KB	-rw-rw-rw-
pkg-config.bat	49.22 KB	-rwxrwxrwx
pl2bat.bat	11.49 KB	-rwxrwxrwx
pl2bat.pl	10.4 KB	-rw-rw-rw-
pl2pm.bat	5.56 KB	-rwxrwxrwx
pler	540 B	-rw-rw-rw-
pler.bat	1.07 KB	-rwxrwxrwx
pm-uninstall	820 B	-rw-rw-rw-
pm-uninstall.bat	1.28 KB	-rwxrwxrwx
pod2html.bat	5.03 KB	-rwxrwxrwx
pod2latex	10.39 KB	-rw-rw-rw-
pod2latex.bat	10.92 KB	-rwxrwxrwx
pod2man.bat	15.42 KB	-rwxrwxrwx
pod2text.bat	11.29 KB	-rwxrwxrwx
pod2usage	4.16 KB	-rw-rw-rw-
pod2usage.bat	4.91 KB	-rwxrwxrwx
podchecker.bat	4.45 KB	-rwxrwxrwx
podselect	2.56 KB	-rw-rw-rw-
podselect.bat	3.07 KB	-rwxrwxrwx
ppd2par	4.64 KB	-rw-rw-rw-
ppd2par.bat	5.32 KB	-rwxrwxrwx
ppm.bat	35.53 KB	-rwxrwxrwx
ppm.pl	33.99 KB	-rw-rw-rw-
primes.bat	21.45 KB	-rwxrwxrwx
primes.pl	20.34 KB	-rw-rw-rw-
prove.bat	14.07 KB	-rwxrwxrwx
ptar	3.38 KB	-rw-rw-rw-
ptar.bat	4.28 KB	-rwxrwxrwx
ptardiff	2.48 KB	-rw-rw-rw-
ptardiff.bat	3.35 KB	-rwxrwxrwx
ptargrep	4.19 KB	-rw-rw-rw-
ptargrep.bat	5.14 KB	-rwxrwxrwx
runperl.bat	2.72 KB	-rwxrwxrwx
search.bat	55.83 KB	-rwxrwxrwx
shasum.bat	10.48 KB	-rwxrwxrwx
splain.bat	20.43 KB	-rwxrwxrwx
streamzip	5.45 KB	-rw-rw-rw-
streamzip.bat	6.42 KB	-rwxrwxrwx
stubmaker.bat	4.01 KB	-rwxrwxrwx
stubmaker.pl	3.35 KB	-rw-rw-rw-
test-yaml	1017 B	-rw-rw-rw-
test-yaml.bat	1.56 KB	-rwxrwxrwx
tpage	8.85 KB	-rw-rw-rw-
tpage.bat	9.64 KB	-rwxrwxrwx
ttree	38.21 KB	-rw-rw-rw-
ttree.bat	39.9 KB	-rwxrwxrwx
use-devel-checklib	2.7 KB	-rw-rw-rw-
use-devel-checklib.bat	3.31 KB	-rwxrwxrwx
whirlpoolsum	4.93 KB	-rw-rw-rw-
whirlpoolsum.bat	5.67 KB	-rwxrwxrwx
wperl.exe	39 KB	-rwxrwxrwx
xml_grep	13.32 KB	-rw-rw-rw-
xml_grep.bat	14.3 KB	-rwxrwxrwx
xml_merge	3.89 KB	-rw-rw-rw-
xml_merge.bat	4.55 KB	-rwxrwxrwx
xml_pp	7.82 KB	-rw-rw-rw-
xml_pp.bat	8.61 KB	-rwxrwxrwx
xml_spellcheck	6.34 KB	-rw-rw-rw-
xml_spellcheck.bat	7.1 KB	-rwxrwxrwx
xml_split	21.13 KB	-rw-rw-rw-
xml_split.bat	22.27 KB	-rwxrwxrwx
xsubpp.bat	5.78 KB	-rwxrwxrwx
zipdetails	55.96 KB	-rw-rw-rw-
zipdetails.bat	59.14 KB	-rwxrwxrwx

Code Editor : xml_pp

#!perl -w
# $Id: /xmltwig/trunk/tools/xml_pp/xml_pp 32 2008-01-18T13:11:52.128782Z mrodrigu  $
use strict;

use XML::Twig;
use File::Temp qw/tempfile/;
use File::Basename qw/dirname/;

my @styles= XML::Twig->_pretty_print_styles; # from XML::Twig
my $styles= join '|', @styles;               # for usage
my %styles= map { $_ => 1} @styles;          # to check option

my $DEFAULT_STYLE= 'indented';

my $USAGE= "usage: $0 [-v] [-i<extension>] [-s ($styles)] [-p <tag(s)>] [-e <encoding>] [-l] [-f <file>] [<files>]";

# because of the -i.bak option I don't think I can use one of the core
# option processing modules, so it's custom handling and no clusterization :--(

my %opt= process_options(); # changes @ARGV

my @twig_options=( pretty_print  => $opt{style},
                   error_context => 1,
                 );
if( $opt{preserve_space_in})
  { push @twig_options, keep_spaces_in => $opt{preserve_space_in};}

if( $opt{encoding})
  { push @twig_options, output_encoding  => $opt{encoding};
  }
else
  { push @twig_options, keep_encoding => 1; }

# in normal (ie not -l) mode tags are output as soon as possible
push @twig_options, twig_handlers => { _all_ => sub { $_[0]->flush } }
  unless( $opt{load});

if( @ARGV)
  { foreach my $file (@ARGV)
      { print STDERR "$file\n" if( $opt{verbose});

my $t= XML::Twig->new( @twig_options);

my $tempfile;
        if( $opt{in_place})
          { (undef, $tempfile)= tempfile( DIR => dirname( $file)) or die "cannot create tempfile for $file: $!\n" ;
            open( PP_OUTPUT, ">$tempfile") or die "cannot create tempfile $tempfile: $!";
            select PP_OUTPUT;
          }
        $t= $t->safe_parsefile( $file);

if( $t)
          { if( $opt{load}) { $t->print; }

select STDOUT;

if( $opt{in_place})
              { close PP_OUTPUT;
                my $mode= mode( $file);
                if( $opt{backup})  
                  { my $backup= backup( $file, $opt{backup});
                    rename( $file, $backup) or die "cannot create backup file $backup: $!"; 
                  }
                rename( $tempfile, $file) or die "cannot overwrite file $file: $!";
                if( $mode ne mode( $file)) { chmod $mode, $file or die "cannot set $file mode to $mode: $!"; }
              }

}
        else
          { if( defined $tempfile)
              { unlink $tempfile or die "cannot unlink temp file $tempfile: $!"; }
            die $@;
          }
      }
  }
else
  { my $t= XML::Twig->new( @twig_options);
    $t->parse( \*STDIN); 
    if( $opt{load}) { $t->print; }
  }

sub mode
  { my( $file)= @_;
    return (stat($file))[2];
  }
 
sub process_options
  { my %opt; 
    while( @ARGV && ($ARGV[0]=~ m{^-}) )
      { my $opt= shift @ARGV;
        if(    ($opt eq '-v') || ($opt eq '--verbose') ) 
          { die $USAGE if( $opt{verbose});
            $opt{verbose}= 1;
          }
        elsif( ($opt eq '-s') || ($opt eq '--style') )  
          { die $USAGE if( $opt{style});
            $opt{style}= shift @ARGV;
            die $USAGE unless( $styles{$opt{style}});
          }
        elsif( ($opt=~ m{^-i(.*)$}) || ($opt=~ m{^--in_place(.*)$}) )
          { die $USAGE if( $opt{in_place});
            $opt{in_place}= 1;
            $opt{backup}= $1 ||'';
          }
        elsif( ($opt eq '-p') || ($opt eq '--preserve') )  
          { my $tags= shift @ARGV;
            my @tags= split /\s+/, $tags;
            $opt{preserve_space_in} ||= [];
            push @{$opt{preserve_space_in}}, @tags;
          }
        elsif( ($opt eq '-e') || ($opt eq '--encoding') ) 
          { die $USAGE if( $opt{encoding});
            $opt{encoding}= shift @ARGV;
          }
        elsif( ($opt eq '-l') || ($opt eq '--load'))
          { die $USAGE if( $opt{load});
            $opt{load}=1;
          }
       elsif( ($opt eq '-f') || ($opt eq '--files') ) 
         { my $file= shift @ARGV;
           push @ARGV, files_from( $file);
          }
        elsif( ($opt eq '-h') || ($opt eq '--help'))  
         { system "pod2text", $0; exit; }
        elsif( $opt eq '--')  
         { last;       }
        else
         { die $USAGE; }
      }

$opt{style} ||= $DEFAULT_STYLE;

return %opt;
  }

# get the list of files (one per line) from a file
sub files_from
 { my $file= shift;
 open( FILES, "<$file") or die "cannot open file $file: $!";
 my @files;
 while( <FILES>) { chomp; push @files, $_; }
 close FILES;
 return @files;
 }

sub backup
  { my( $file, $extension)= @_;
    my $backup;
    if( $extension=~ m{\*})
      { ($backup= $extension)=~ s{\*}{$file}g; }
    else
      { $backup= $file.$extension; }
    return $backup;
  }
  
__END__

=head1 NAME

xml_pp - xml pretty-printer

=head1 SYNOPSYS

xml_pp [options] [<files>]

=head1 DESCRIPTION

XML pretty printer using XML::Twig

=head1 OPTIONS

=over 4

=item -i[<extension>]

edits the file(s) in place, if an extension is provided (no space between 
C<-i> and the extension) then the original file is backed-up with that extension

The rules for the extension are the same as Perl's (see perldoc perlrun): if
the extension includes no "*" then it is appended to the original file name,
If the extension does contain one or more "*" characters, then each "*" is 
replaced with the current filename.

=item -s <style>

the style to use for pretty printing: none, nsgmls, nice, indented, record, or
record_c (see XML::Twig docs for the exact description of those styles), 
'indented' by default

=item -p <tag(s)>

preserves white spaces in tags. You can use several C<-p> options or quote the 
tags if you need more than one

=item -e <encoding>

use XML::Twig output_encoding (based on Text::Iconv or Unicode::Map8 and 
Unicode::String) to set the output encoding. By default the original encoding
is preserved.

If this option is used the XML declaration is updated (and created if there was
none).

Make sure that the encoding is supported by the parser you use if you want to
be able to process the pretty_printed file (XML::Parser does not support 
'latin1' for example, you have to use 'iso-8859-1')

=item -l

loads the documents in memory instead of outputting them as they are being
parsed.

This prevents a bug (see L<BUGS|bugs>) but uses more memory

=item -f <file>

read the list of files to process from <file>, one per line

=item -v

verbose (list the current file being processed)

=item --

stop argument processing (to process files that start with -)

=item -h

display help

=back

=head1 EXAMPLES

xml_pp foo.xml > foo_pp.xml # pretty print foo.xml 
 xml_pp < foo.xml > foo_pp.xml # pretty print from standard input

xml_pp -v -i.bak *.xml # pretty print .xml files, with backups
 xml_pp -v -i'orig_*' *.xml # backups are named orig_<filename>

xml_pp -i -p pre foo.xhtml            # preserve spaces in pre tags
  
  xml_pp -i.bak -p 'pre code' foo.xml   # preserve spaces in pre and code tags
  xml_pp -i.bak -p pre -p code foo.xml  # same

xml_pp -i -s record mydb_export.xml   # pretty print using the record style

xml_pp -e utf8 -i foo.xml             # output will be in utf8
  xml_pp -e iso-8859-1 -i foo.xml       # output will be in iso-8859-1

xml_pp -v -i.bak -f lof               # pretty print in place files from lof
  
  xml_pp -- -i.xml                      # pretty print the -i.xml file

xml_pp -l foo.xml                     # loads the entire file in memory 
                                        # before pretty printing it

xml_pp -h                             # display help

=head1 BUGS

Elements with mixed content that start with an embedded element get an extra \n

<elt>btotobold</elt>

will be output as

<elt>
 btotobold</elt>

Using the C<-l> option solves this bug (but uses more memory)

=head1 TODO

update XML::Twig to use Encode with perl 5.8.0

=head1 AUTHOR

Michel Rodriguez <mirod@xmltwig.com>

${this.title}

Code Editor : xml_pp