Gecko [ edgpens.lpkmn.gov.my ]

Name	Size	Permission
BucketList.pm	10.35 KB	-rw-rw-rw-
Data.pm	264 B	-rw-rw-rw-
Index.pm	2.27 KB	-rw-rw-rw-
Null.pm	1.26 KB	-rw-rw-rw-
Reference.pm	15.81 KB	-rw-rw-rw-
Scalar.pm	3.69 KB	-rw-rw-rw-

Code Editor : Reference.pm

package DBM::Deep::Sector::File::Reference;

use 5.008_004;

use strict;
use warnings FATAL => 'all';

use base qw( DBM::Deep::Sector::File::Data );

use Scalar::Util;

my $STALE_SIZE = 2;

# Please refer to the pack() documentation for further information
my %StP = (
    1 => 'C', # Unsigned char value (no order needed as it's just one byte)
    2 => 'n', # Unsigned short in "network" (big-endian) order
    4 => 'N', # Unsigned long in "network" (big-endian) order
    8 => 'Q', # Usigned quad (no order specified, presumably machine-dependent)
);

sub _init {
    my $self = shift;

my $e = $self->engine;

unless ( $self->offset ) {
        my $classname = Scalar::Util::blessed( delete $self->{data} );
        my $leftover = $self->size - $self->base_size - 3 * $e->byte_size;

my $class_offset = 0;
        if ( defined $classname ) {
            my $class_sector = DBM::Deep::Sector::File::Scalar->new({
                engine => $e,
                data   => $classname,
            });
            $class_offset = $class_sector->offset;
        }

$self->{offset} = $e->_request_data_sector( $self->size );
        $e->storage->print_at( $self->offset, $self->type ); # Sector type
        # Skip staleness counter
        $e->storage->print_at( $self->offset + $self->base_size,
            pack( $StP{$e->byte_size}, 0 ),             # Index/BList loc
            pack( $StP{$e->byte_size}, $class_offset ), # Classname loc
            pack( $StP{$e->byte_size}, 1 ),             # Initial refcount
            chr(0) x $leftover,                         # Zero-fill the rest
        );
    }
    else {
        $self->{type} = $e->storage->read_at( $self->offset, 1 );
    }

$self->{staleness} = unpack(
        $StP{$STALE_SIZE},
        $e->storage->read_at( $self->offset + $e->SIG_SIZE, $STALE_SIZE ),
    );

return;
}

sub get_data_location_for {
    my $self = shift;
    my ($args) = @_;

# Assume that the head is not allowed unless otherwise specified.
    $args->{allow_head} = 0 unless exists $args->{allow_head};

# Assume we don't create a new blist location unless otherwise specified.
    $args->{create} = 0 unless exists $args->{create};

my $blist = $self->get_bucket_list({
        key_md5 => $args->{key_md5},
        key => $args->{key},
        create  => $args->{create},
    });
    return unless $blist && $blist->{found};

# At this point, $blist knows where the md5 is. What it -doesn't- know yet
    # is whether or not this transaction has this key. That's part of the next
    # function call.
    my $location = $blist->get_data_location_for({
        allow_head => $args->{allow_head},
    }) or return;

return $location;
}

sub get_data_for {
    my $self = shift;
    my ($args) = @_;

my $location = $self->get_data_location_for( $args )
        or return;

return $self->engine->load_sector( $location );
}

sub write_data {
    my $self = shift;
    my ($args) = @_;

my $blist = $self->get_bucket_list({
        key_md5 => $args->{key_md5},
        key => $args->{key},
        create  => 1,
    }) or DBM::Deep->_throw_error( "How did write_data fail (no blist)?!" );

# Handle any transactional bookkeeping.
    if ( $self->engine->trans_id ) {
        if ( ! $blist->has_md5 ) {
            $blist->mark_deleted({
                trans_id => 0,
            });
        }
    }
    else {
        my @trans_ids = $self->engine->get_running_txn_ids;
        if ( $blist->has_md5 ) {
            if ( @trans_ids ) {
                my $old_value = $blist->get_data_for;
                foreach my $other_trans_id ( @trans_ids ) {
                    next if $blist->get_data_location_for({
                        trans_id   => $other_trans_id,
                        allow_head => 0,
                    });
                    $blist->write_md5({
                        trans_id => $other_trans_id,
                        key      => $args->{key},
                        key_md5  => $args->{key_md5},
                        value    => $old_value->clone,
                    });
                }
            }
        }
        else {
            if ( @trans_ids ) {
                foreach my $other_trans_id ( @trans_ids ) {
                    #XXX This doesn't seem to possible to ever happen . . .
                    next if $blist->get_data_location_for({ trans_id => $other_trans_id, allow_head => 0 });
                    $blist->mark_deleted({
                        trans_id => $other_trans_id,
                    });
                }
            }
        }
    }

#XXX Is this safe to do transactionally?
    # Free the place we're about to write to.
    if ( $blist->get_data_location_for({ allow_head => 0 }) ) {
        $blist->get_data_for({ allow_head => 0 })->free;
    }

$blist->write_md5({
        key      => $args->{key},
        key_md5  => $args->{key_md5},
        value    => $args->{value},
    });
}

sub delete_key {
    my $self = shift;
    my ($args) = @_;

# This can return nothing if we are deleting an entry in a hashref that was
    # auto-vivified as part of the delete process. For example:
    #     my $x = {};
    #     delete $x->{foo}{bar};
    my $blist = $self->get_bucket_list({
        key_md5 => $args->{key_md5},
    }) or return;

# Save the location so that we can free the data
    my $location = $blist->get_data_location_for({
        allow_head => 0,
    });
    my $old_value = $location && $self->engine->load_sector( $location );

my @trans_ids = $self->engine->get_running_txn_ids;

# If we're the HEAD and there are running txns, then we need to clone this
    # value to the other transactions to preserve Isolation.
    if ( $self->engine->trans_id == 0 ) {
        if ( @trans_ids ) {
            foreach my $other_trans_id ( @trans_ids ) {
                next if $blist->get_data_location_for({ trans_id => $other_trans_id, allow_head => 0 });
                $blist->write_md5({
                    trans_id => $other_trans_id,
                    key      => $args->{key},
                    key_md5  => $args->{key_md5},
                    value    => $old_value->clone,
                });
            }
        }
    }

my $data;
    if ( @trans_ids ) {
        $blist->mark_deleted( $args );

if ( $old_value ) {
            #XXX Is this export => 1 actually doing anything?
            $data = $old_value->data({ export => 1 });
            $old_value->free;
        }
    }
    else {
        $data = $blist->delete_md5( $args );
    }

return $data;
}

sub write_blist_loc {
    my $self = shift;
    my ($loc) = @_;

my $engine = $self->engine;
    $engine->storage->print_at( $self->offset + $self->base_size,
        pack( $StP{$engine->byte_size}, $loc ),
    );
}

sub get_blist_loc {
    my $self = shift;

my $e = $self->engine;
    my $blist_loc = $e->storage->read_at( $self->offset + $self->base_size, $e->byte_size );
    return unpack( $StP{$e->byte_size}, $blist_loc );
}

sub get_bucket_list {
    my $self = shift;
    my ($args) = @_;
    $args ||= {};

# XXX Add in check here for recycling?

my $engine = $self->engine;

my $blist_loc = $self->get_blist_loc;

# There's no index or blist yet
    unless ( $blist_loc ) {
        return unless $args->{create};

my $blist = DBM::Deep::Sector::File::BucketList->new({
            engine  => $engine,
            key_md5 => $args->{key_md5},
        });

$self->write_blist_loc( $blist->offset );
#        $engine->storage->print_at( $self->offset + $self->base_size,
#            pack( $StP{$engine->byte_size}, $blist->offset ),
#        );

return $blist;
    }

my $sector = $engine->load_sector( $blist_loc )
        or DBM::Deep->_throw_error( "Cannot read sector at $blist_loc in get_bucket_list()" );
    my $i = 0;
    my $last_sector = undef;
    while ( $sector->isa( 'DBM::Deep::Sector::File::Index' ) ) {
        $blist_loc = $sector->get_entry( ord( substr( $args->{key_md5}, $i++, 1 ) ) );
        $last_sector = $sector;
        if ( $blist_loc ) {
            $sector = $engine->load_sector( $blist_loc )
                or DBM::Deep->_throw_error( "Cannot read sector at $blist_loc in get_bucket_list()" );
        }
        else {
            $sector = undef;
            last;
        }
    }

# This means we went through the Index sector(s) and found an empty slot
    unless ( $sector ) {
        return unless $args->{create};

DBM::Deep->_throw_error( "No last_sector when attempting to build a new entry" )
            unless $last_sector;

my $blist = DBM::Deep::Sector::File::BucketList->new({
            engine  => $engine,
            key_md5 => $args->{key_md5},
        });

$last_sector->set_entry( ord( substr( $args->{key_md5}, $i - 1, 1 ) ) => $blist->offset );

return $blist;
    }

$sector->find_md5( $args->{key_md5} );

# See whether or not we need to reindex the bucketlist
    # Yes, the double-braces are there for a reason. if() doesn't create a
    # redo-able block, so we have to create a bare block within the if() for
    # redo-purposes.
    # Patch and idea submitted by sprout@cpan.org. -RobK, 2008-01-09
    if ( !$sector->has_md5 && $args->{create} && $sector->{idx} == -1 ) {{
        my $redo;

my $new_index = DBM::Deep::Sector::File::Index->new({
            engine => $engine,
        });

my %blist_cache;
        #XXX q.v. the comments for this function.
        foreach my $entry ( $sector->chopped_up ) {
            my ($spot, $md5) = @{$entry};
            my $idx = ord( substr( $md5, $i, 1 ) );

# XXX This is inefficient
            my $blist = $blist_cache{$idx}
                ||= DBM::Deep::Sector::File::BucketList->new({
                    engine => $engine,
                });

$new_index->set_entry( $idx => $blist->offset );

my $new_spot = $blist->write_at_next_open( $md5 );
            $engine->reindex_entry( $spot => $new_spot );
        }

# Handle the new item separately.
        {
            my $idx = ord( substr( $args->{key_md5}, $i, 1 ) );

# If all the previous blist's items have been thrown into one
            # blist and the new item belongs in there too, we need
            # another index.
            if ( keys %blist_cache == 1 and each %blist_cache == $idx ) {
                ++$i, ++$redo;
            } else {
                my $blist = $blist_cache{$idx}
                    ||= DBM::Deep::Sector::File::BucketList->new({
                        engine => $engine,
                    });
    
                $new_index->set_entry( $idx => $blist->offset );
    
                #XXX THIS IS HACKY!
                $blist->find_md5( $args->{key_md5} );
                $blist->write_md5({
                    key     => $args->{key},
                    key_md5 => $args->{key_md5},
                    value   => DBM::Deep::Sector::File::Null->new({
                        engine => $engine,
                        data   => undef,
                    }),
                });
            }
        }

if ( $last_sector ) {
            $last_sector->set_entry(
                ord( substr( $args->{key_md5}, $i - 1, 1 ) ),
                $new_index->offset,
            );
        } else {
            $engine->storage->print_at( $self->offset + $self->base_size,
                pack( $StP{$engine->byte_size}, $new_index->offset ),
            );
        }

$sector->wipe;
        $sector->free;

if ( $redo ) {
            (undef, $sector) = %blist_cache;
            $last_sector = $new_index;
            redo;
        }

$sector = $blist_cache{ ord( substr( $args->{key_md5}, $i, 1 ) ) };
        $sector->find_md5( $args->{key_md5} );
    }}

return $sector;
}

sub get_class_offset {
    my $self = shift;

my $e = $self->engine;
    return unpack(
        $StP{$e->byte_size},
        $e->storage->read_at(
            $self->offset + $self->base_size + 1 * $e->byte_size, $e->byte_size,
        ),
    );
}

sub get_classname {
    my $self = shift;

my $class_offset = $self->get_class_offset;

return unless $class_offset;

return $self->engine->load_sector( $class_offset )->data;
}

# Look to hoist this method into a ::Reference trait
sub data {
    my $self = shift;
    my ($args) = @_;
    $args ||= {};

my $engine = $self->engine;
    my $cache_entry = $engine->cache->{ $self->offset } ||= {};
    my $trans_id = $engine->trans_id;
    my $obj;
    if ( !defined $$cache_entry{ $trans_id } ) {
        $obj = DBM::Deep->new({
            type        => $self->type,
            base_offset => $self->offset,
            staleness   => $self->staleness,
            storage     => $engine->storage,
            engine      => $engine,
        });

$$cache_entry{ $trans_id } = $obj;
        Scalar::Util::weaken($$cache_entry{ $trans_id });
    }
    else {
        $obj = $$cache_entry{ $trans_id };
    }

# We're not exporting, so just return.
    unless ( $args->{export} ) {
        if ( $engine->storage->{autobless} ) {
            my $classname = $self->get_classname;
            if ( defined $classname ) {
                bless $obj, $classname;
            }
        }

return $obj;
    }

# We shouldn't export if this is still referred to.
    if ( $self->get_refcount > 1 ) {
        return $obj;
    }

return $obj->export;
}

sub free {
    my $self = shift;

# We're not ready to be removed yet.
    return if $self->decrement_refcount > 0;

my $e = $self->engine;

# Rebless the object into DBM::Deep::Null.
    # In external_refs mode, this will already have been removed from
    # the cache, so we can skip this.
    if(!$e->{external_refs}) {
#    eval { %{ $e->cache->{ $self->offset }{ $e->trans_id } } = (); };
#    eval { @{ $e->cache->{ $self->offset }{ $e->trans_id } } = (); };
      my $cache = $e->cache;
      my $off = $self->offset;
      if(  exists $cache->{ $off }
       and exists $cache->{ $off }{ my $trans_id = $e->trans_id } ) {
        bless $cache->{ $off }{ $trans_id }, 'DBM::Deep::Null'
         if defined $cache->{ $off }{ $trans_id };
        delete $cache->{ $off }{ $trans_id };
      }
    }

my $blist_loc = $self->get_blist_loc;
    $e->load_sector( $blist_loc )->free if $blist_loc;

my $class_loc = $self->get_class_offset;
    $e->load_sector( $class_loc )->free if $class_loc;

$self->SUPER::free();
}

sub increment_refcount {
    my $self = shift;

my $refcount = $self->get_refcount;

$refcount++;

$self->write_refcount( $refcount );

return $refcount;
}

sub decrement_refcount {
    my $self = shift;

my $refcount = $self->get_refcount;

$refcount--;

$self->write_refcount( $refcount );

return $refcount;
}

sub get_refcount {
    my $self = shift;

my $e = $self->engine;
    return unpack(
        $StP{$e->byte_size},
        $e->storage->read_at(
            $self->offset + $self->base_size + 2 * $e->byte_size, $e->byte_size,
        ),
    );
}

sub write_refcount {
    my $self = shift;
    my ($num) = @_;

my $e = $self->engine;
    $e->storage->print_at(
        $self->offset + $self->base_size + 2 * $e->byte_size,
        pack( $StP{$e->byte_size}, $num ),
    );
}

sub clear {
    my $self = shift;

my $blist_loc = $self->get_blist_loc or return;

my $engine = $self->engine;

# This won't work with autoblessed items.
    if ($engine->get_running_txn_ids) {
        # ~~~ Temporary; the code below this block needs to be modified to
        #     take transactions into account.
        $self->data->_get_self->_clear;
        return;
    }

my $sector = $engine->load_sector( $blist_loc )
        or DBM::Deep->_throw_error(
           "Cannot read sector at $blist_loc in clear()"
        );

# Set blist offset to 0
    $engine->storage->print_at( $self->offset + $self->base_size,
        pack( $StP{$engine->byte_size}, 0 ),
    );

# Free the blist
    $sector->free;

return;
}

1;
__END__

${this.title}

Code Editor : Reference.pm