Gecko [ edgpens.lpkmn.gov.my ]

Name	Size	Permission
Registry	[ DIR ]	drwxrwxrwx
.mad-root	0 B	-rw-rw-rw-
CommPort.pm	88.49 KB	-rw-rw-rw-
Registry.pm	61.08 KB	-rw-rw-rw-

Code Editor : CommPort.pm

# This part includes the low-level API calls
package Win32API::CommPort;

use strict;
use warnings;

use Win32;
use Win32::API;

use Carp;

#### API declarations ####
no strict 'subs';	# these may be imported someday

our $_CreateFile = Win32::API->new("kernel32", "CreateFile",
	 [P, N, N, N, N, N, N], N);
our $_CloseHandle = Win32::API->new("kernel32", "CloseHandle", [N], N);
our $_GetCommState = Win32::API->new("kernel32", "GetCommState", [N, P], I);
our $_SetCommState = Win32::API->new("kernel32", "SetCommState", [N, P], I);
our $_SetupComm = Win32::API->new("kernel32", "SetupComm", [N, N, N], I);
our $_PurgeComm = Win32::API->new("kernel32", "PurgeComm", [N, N], I);
our $_CreateEvent = Win32::API->new("kernel32", "CreateEvent", [P, I, I, P], N);
our $_GetCommTimeouts = Win32::API->new("kernel32", "GetCommTimeouts",
	 [N, P], I);
our $_SetCommTimeouts = Win32::API->new("kernel32", "SetCommTimeouts",
	 [N, P], I);
our $_GetCommProperties = Win32::API->new("kernel32", "GetCommProperties",
	 [N, P], I);
our $_ReadFile = Win32::API->new("kernel32", "ReadFile", [N, P, N, P, P], I);
our $_WriteFile = Win32::API->new("kernel32", "WriteFile", [N, P, N, P, P], I);
our $_TransmitCommChar = Win32::API->new("kernel32", "TransmitCommChar", [N, I], I);
our $_ClearCommBreak = Win32::API->new("kernel32", "ClearCommBreak", [N], I);
our $_SetCommBreak = Win32::API->new("kernel32", "SetCommBreak", [N], I);
our $_ClearCommError = Win32::API->new("kernel32", "ClearCommError", [N, P, P], I);
our $_EscapeCommFunction = Win32::API->new("kernel32", "EscapeCommFunction",
	 [N, N], I);
our $_GetCommModemStatus = Win32::API->new("kernel32", "GetCommModemStatus",
	 [N, P], I);
our $_GetOverlappedResult = Win32::API->new("kernel32", "GetOverlappedResult",
	 [N, P, P, I], I);

#### these are not used yet

our $_GetCommConfig = Win32::API->new("kernel32", "GetCommConfig", [N, P, P], I);
our $_GetCommMask = Win32::API->new("kernel32", "GetCommMask", [N, P], I);
our $_SetCommConfig = Win32::API->new("kernel32", "SetCommConfig", [N, P, N], I);
our $_SetCommMask = Win32::API->new("kernel32", "SetCommMask", [N, N], I);
our $_WaitCommEvent = Win32::API->new("kernel32", "WaitCommEvent", [N, P, P], I);
our $_ResetEvent = Win32::API->new("kernel32", "ResetEvent", [N], I);

use strict;

our $VERSION = '0.21';
our $RBUF_Size = 4096;

require Exporter;

our @ISA = qw(Exporter);

our @EXPORT= qw();
our @EXPORT_OK= qw();
our %EXPORT_TAGS = (
		STAT	=> [qw( BM_fCtsHold	BM_fDsrHold
				BM_fRlsdHold	BM_fXoffHold
				BM_fXoffSent	BM_fEof
				BM_fTxim	BM_AllBits
				MS_CTS_ON	MS_DSR_ON
				MS_RING_ON	MS_RLSD_ON
				CE_RXOVER	CE_OVERRUN
				CE_RXPARITY	CE_FRAME
				CE_BREAK	CE_TXFULL
				CE_MODE		ST_BLOCK
				ST_INPUT	ST_OUTPUT
				ST_ERROR )],

RAW	=> [qw( CloseHandle		CreateFile
				GetCommState		ReadFile
				SetCommState		SetupComm
				PurgeComm		CreateEvent
				GetCommTimeouts		SetCommTimeouts
				GetCommProperties	ClearCommBreak
				ClearCommError		EscapeCommFunction
				GetCommConfig		GetCommMask
				GetCommModemStatus	SetCommBreak
				SetCommConfig		SetCommMask
				TransmitCommChar	WaitCommEvent
				WriteFile		ResetEvent
				GetOverlappedResult
				PURGE_TXABORT		PURGE_RXABORT
				PURGE_TXCLEAR		PURGE_RXCLEAR
				SETXOFF			SETXON
				SETRTS			CLRRTS
				SETDTR			CLRDTR
				SETBREAK		CLRBREAK
				EV_RXCHAR		EV_RXFLAG
				EV_TXEMPTY		EV_CTS
				EV_DSR			EV_RLSD
				EV_BREAK		EV_ERR
				EV_RING			EV_PERR
				EV_RX80FULL		EV_EVENT1
				EV_EVENT2		ERROR_IO_INCOMPLETE
				ERROR_IO_PENDING )],

COMMPROP	=> [qw( BAUD_USER	BAUD_075	BAUD_110
				BAUD_134_5	BAUD_150	BAUD_300
				BAUD_600	BAUD_1200	BAUD_1800
				BAUD_2400	BAUD_4800	BAUD_7200
				BAUD_9600	BAUD_14400	BAUD_19200
				BAUD_38400	BAUD_56K	BAUD_57600
				BAUD_115200	BAUD_128K

PST_FAX		PST_LAT		PST_MODEM
				PST_RS232	PST_RS422	PST_RS423
				PST_RS449	PST_SCANNER	PST_X25
				PST_NETWORK_BRIDGE	PST_PARALLELPORT
				PST_TCPIP_TELNET	PST_UNSPECIFIED

PCF_INTTIMEOUTS		PCF_PARITY_CHECK
				PCF_16BITMODE		PCF_DTRDSR
				PCF_SPECIALCHARS	PCF_RLSD
				PCF_RTSCTS		PCF_SETXCHAR
				PCF_TOTALTIMEOUTS	PCF_XONXOFF

SP_BAUD		SP_DATABITS	SP_HANDSHAKING
				SP_PARITY	SP_PARITY_CHECK	SP_RLSD
				SP_STOPBITS	SP_SERIALCOMM

DATABITS_5	DATABITS_6	DATABITS_7
				DATABITS_8	DATABITS_16	DATABITS_16X

STOPBITS_10	STOPBITS_15	STOPBITS_20
				PARITY_SPACE	PARITY_NONE	PARITY_ODD
				PARITY_EVEN	PARITY_MARK
				COMMPROP_INITIALIZED )],

DCB	=> [qw( CBR_110		CBR_300		CBR_600
				CBR_1200	CBR_2400	CBR_4800
				CBR_9600	CBR_14400	CBR_19200
				CBR_38400	CBR_56000	CBR_57600
				CBR_115200	CBR_128000	CBR_256000

DTR_CONTROL_DISABLE	DTR_CONTROL_ENABLE
				DTR_CONTROL_HANDSHAKE	RTS_CONTROL_DISABLE
				RTS_CONTROL_ENABLE	RTS_CONTROL_HANDSHAKE
				RTS_CONTROL_TOGGLE

EVENPARITY	MARKPARITY	NOPARITY
				ODDPARITY	SPACEPARITY

ONESTOPBIT	ONE5STOPBITS	TWOSTOPBITS

FM_fBinary		FM_fParity
				FM_fOutxCtsFlow		FM_fOutxDsrFlow
				FM_fDtrControl		FM_fDsrSensitivity
				FM_fTXContinueOnXoff	FM_fOutX
				FM_fInX			FM_fErrorChar
				FM_fNull		FM_fRtsControl
				FM_fAbortOnError	FM_fDummy2 )],

PARAM	=> [qw( LONGsize	SHORTsize	OS_Error
				nocarp		internal_buffer	yes_true )]);

Exporter::export_ok_tags('STAT', 'RAW', 'COMMPROP', 'DCB', 'PARAM');

$EXPORT_TAGS{ALL} = \@EXPORT_OK;

#### subroutine wrappers for API calls

sub CloseHandle {
    return unless ( 1 == @_ );
    return $_CloseHandle->Call( shift );
}

sub CreateFile {
    return $_CreateFile->Call( @_ );
    # returns handle
}

sub GetCommState {
    return $_GetCommState->Call( @_ );
}

sub SetCommState {
    return $_SetCommState->Call( @_ );
}

sub SetupComm {
    return $_SetupComm->Call( @_ );
}

sub PurgeComm {
    return $_PurgeComm->Call( @_ );
}

sub CreateEvent {
    return $_CreateEvent->Call( @_ );
}

sub GetCommTimeouts {
    return $_GetCommTimeouts->Call( @_ );
}

sub SetCommTimeouts {
    return $_SetCommTimeouts->Call( @_ );
}

sub GetCommProperties {
    return $_GetCommProperties->Call( @_ );
}

sub ReadFile {
    return $_ReadFile->Call( @_ );
}

sub WriteFile {
    return $_WriteFile->Call( @_ );
}

sub TransmitCommChar {
    return $_TransmitCommChar->Call( @_ );
}

sub ClearCommBreak {
    return unless ( 1 == @_ );
    return $_ClearCommBreak->Call( shift );
}

sub SetCommBreak {
    return unless ( 1 == @_ );
    return $_SetCommBreak->Call( shift );
}

sub ClearCommError {
    return $_ClearCommError->Call( @_ );
}

sub EscapeCommFunction {
    return $_EscapeCommFunction->Call( @_ );
}

sub GetCommModemStatus {
    return $_GetCommModemStatus->Call( @_ );
}

sub GetOverlappedResult {
    return $_GetOverlappedResult->Call( @_ );
}

sub GetCommConfig {
    return $_GetCommConfig->Call( @_ );
}

sub GetCommMask {
    return $_GetCommMask->Call( @_ );
}

sub SetCommConfig {
    return $_SetCommConfig->Call( @_ );
}

sub SetCommMask {
    return $_SetCommMask->Call( @_ );
}

sub WaitCommEvent {
    return $_WaitCommEvent->Call( @_ );
}

sub ResetEvent {
    return unless ( 1 == @_ );
    return $_ResetEvent->Call( shift );
}

#### "constant" declarations from Win32 header files ####
#### compatible with ActiveState ####

## COMMPROP structure
use constant SP_SERIALCOMM		=> 0x1;
use constant BAUD_075			=> 0x1;
use constant BAUD_110			=> 0x2;
use constant BAUD_134_5			=> 0x4;
use constant BAUD_150			=> 0x8;
use constant BAUD_300			=> 0x10;
use constant BAUD_600			=> 0x20;
use constant BAUD_1200			=> 0x40;
use constant BAUD_1800			=> 0x80;
use constant BAUD_2400			=> 0x100;
use constant BAUD_4800			=> 0x200;
use constant BAUD_7200			=> 0x400;
use constant BAUD_9600			=> 0x800;
use constant BAUD_14400			=> 0x1000;
use constant BAUD_19200			=> 0x2000;
use constant BAUD_38400			=> 0x4000;
use constant BAUD_56K			=> 0x8000;
use constant BAUD_57600			=> 0x40000;
use constant BAUD_115200		=> 0x20000;
use constant BAUD_128K			=> 0x10000;
use constant BAUD_USER			=> 0x10000000;
use constant PST_FAX			=> 0x21;
use constant PST_LAT			=> 0x101;
use constant PST_MODEM			=> 0x6;
use constant PST_NETWORK_BRIDGE		=> 0x100;
use constant PST_PARALLELPORT		=> 0x2;
use constant PST_RS232			=> 0x1;
use constant PST_RS422			=> 0x3;
use constant PST_RS423			=> 0x4;
use constant PST_RS449			=> 0x5;
use constant PST_SCANNER		=> 0x22;
use constant PST_TCPIP_TELNET		=> 0x102;
use constant PST_UNSPECIFIED		=> 0;
use constant PST_X25			=> 0x103;
use constant PCF_16BITMODE		=> 0x200;
use constant PCF_DTRDSR			=> 0x1;
use constant PCF_INTTIMEOUTS		=> 0x80;
use constant PCF_PARITY_CHECK		=> 0x8;
use constant PCF_RLSD			=> 0x4;
use constant PCF_RTSCTS			=> 0x2;
use constant PCF_SETXCHAR		=> 0x20;
use constant PCF_SPECIALCHARS		=> 0x100;
use constant PCF_TOTALTIMEOUTS		=> 0x40;
use constant PCF_XONXOFF		=> 0x10;
use constant SP_BAUD			=> 0x2;
use constant SP_DATABITS		=> 0x4;
use constant SP_HANDSHAKING		=> 0x10;
use constant SP_PARITY			=> 0x1;
use constant SP_PARITY_CHECK		=> 0x20;
use constant SP_RLSD			=> 0x40;
use constant SP_STOPBITS		=> 0x8;
use constant DATABITS_5			=> 1;
use constant DATABITS_6			=> 2;
use constant DATABITS_7			=> 4;
use constant DATABITS_8			=> 8;
use constant DATABITS_16		=> 16;
use constant DATABITS_16X		=> 32;
use constant STOPBITS_10		=> 1;
use constant STOPBITS_15		=> 2;
use constant STOPBITS_20		=> 4;
use constant PARITY_NONE		=> 256;
use constant PARITY_ODD			=> 512;
use constant PARITY_EVEN		=> 1024;
use constant PARITY_MARK		=> 2048;
use constant PARITY_SPACE		=> 4096;
use constant COMMPROP_INITIALIZED	=> 0xe73cf52e;

## DCB structure
use constant CBR_110			=> 110;
use constant CBR_300			=> 300;
use constant CBR_600			=> 600;
use constant CBR_1200			=> 1200;
use constant CBR_2400			=> 2400;
use constant CBR_4800			=> 4800;
use constant CBR_9600			=> 9600;
use constant CBR_14400			=> 14400;
use constant CBR_19200			=> 19200;
use constant CBR_38400			=> 38400;
use constant CBR_56000			=> 56000;
use constant CBR_57600			=> 57600;
use constant CBR_115200			=> 115200;
use constant CBR_128000			=> 128000;
use constant CBR_256000			=> 256000;
use constant DTR_CONTROL_DISABLE	=> 0;
use constant DTR_CONTROL_ENABLE		=> 1;
use constant DTR_CONTROL_HANDSHAKE	=> 2;
use constant RTS_CONTROL_DISABLE	=> 0;
use constant RTS_CONTROL_ENABLE		=> 1;
use constant RTS_CONTROL_HANDSHAKE	=> 2;
use constant RTS_CONTROL_TOGGLE		=> 3;
use constant EVENPARITY			=> 2;
use constant MARKPARITY			=> 3;
use constant NOPARITY			=> 0;
use constant ODDPARITY			=> 1;
use constant SPACEPARITY		=> 4;
use constant ONESTOPBIT			=> 0;
use constant ONE5STOPBITS		=> 1;
use constant TWOSTOPBITS		=> 2;

## Flowcontrol bit mask in DCB
use constant FM_fBinary			=> 0x1;
use constant FM_fParity			=> 0x2;
use constant FM_fOutxCtsFlow		=> 0x4;
use constant FM_fOutxDsrFlow		=> 0x8;
use constant FM_fDtrControl		=> 0x30;
use constant FM_fDsrSensitivity		=> 0x40;
use constant FM_fTXContinueOnXoff	=> 0x80;
use constant FM_fOutX			=> 0x100;
use constant FM_fInX			=> 0x200;
use constant FM_fErrorChar		=> 0x400;
use constant FM_fNull			=> 0x800;
use constant FM_fRtsControl		=> 0x3000;
use constant FM_fAbortOnError		=> 0x4000;
use constant FM_fDummy2			=> 0xffff8000;

## COMSTAT bit mask
use constant BM_fCtsHold	=> 0x1;
use constant BM_fDsrHold	=> 0x2;
use constant BM_fRlsdHold	=> 0x4;
use constant BM_fXoffHold	=> 0x8;
use constant BM_fXoffSent	=> 0x10;
use constant BM_fEof		=> 0x20;
use constant BM_fTxim		=> 0x40;
use constant BM_AllBits		=> 0x7f;

## PurgeComm bit mask
use constant PURGE_TXABORT	=> 0x1;
use constant PURGE_RXABORT	=> 0x2;
use constant PURGE_TXCLEAR	=> 0x4;
use constant PURGE_RXCLEAR	=> 0x8;

## GetCommModemStatus bit mask
use constant MS_CTS_ON		=> 0x10;
use constant MS_DSR_ON		=> 0x20;
use constant MS_RING_ON		=> 0x40;
use constant MS_RLSD_ON		=> 0x80;

## EscapeCommFunction operations
use constant SETXOFF		=> 0x1;
use constant SETXON		=> 0x2;
use constant SETRTS		=> 0x3;
use constant CLRRTS		=> 0x4;
use constant SETDTR		=> 0x5;
use constant CLRDTR		=> 0x6;
use constant SETBREAK		=> 0x8;
use constant CLRBREAK		=> 0x9;

## ClearCommError bit mask
use constant CE_RXOVER		=> 0x1;
use constant CE_OVERRUN		=> 0x2;
use constant CE_RXPARITY	=> 0x4;
use constant CE_FRAME		=> 0x8;
use constant CE_BREAK		=> 0x10;
use constant CE_TXFULL		=> 0x100;
#### LPT only
# use constant CE_PTO		=> 0x200;
# use constant CE_IOE		=> 0x400;
# use constant CE_DNS		=> 0x800;
# use constant CE_OOP		=> 0x1000;
#### LPT only
use constant CE_MODE		=> 0x8000;

## GetCommMask bits
use constant EV_RXCHAR		=> 0x1;
use constant EV_RXFLAG		=> 0x2;
use constant EV_TXEMPTY		=> 0x4;
use constant EV_CTS		=> 0x8;
use constant EV_DSR		=> 0x10;
use constant EV_RLSD		=> 0x20;
use constant EV_BREAK		=> 0x40;
use constant EV_ERR		=> 0x80;
use constant EV_RING		=> 0x100;
use constant EV_PERR		=> 0x200;
use constant EV_RX80FULL	=> 0x400;
use constant EV_EVENT1		=> 0x800;
use constant EV_EVENT2		=> 0x1000;

## Allowed OVERLAP errors
use constant ERROR_IO_INCOMPLETE	=> 996;
use constant ERROR_IO_PENDING		=> 997;

#### "constant" declarations compatible with ActiveState ####

my $DCBformat="LLLSSSCCCCCCCCS";
my $CP_format1="SSLLLLLLLLLSSLLLLSA*";			 # rs232
my $CP_format6="SSLLLLLLLLLSSLLLLLLLLLLLLLLLLLLLLLLLA*"; # modem
my $CP_format0="SA50LA244";				 # pre-read

my $OVERLAPPEDformat="LLLLL";
my $TIMEOUTformat="LLLLL";
my $COMSTATformat="LLL";
my $cfg_file_sig="Win32API::SerialPort_Configuration_File -- DO NOT EDIT --\n";

use constant SHORTsize	=> 0xffff;
use constant LONGsize	=> 0xffffffff;

use constant ST_BLOCK	=> 0;	# status offsets for caller
use constant ST_INPUT	=> 1;
use constant ST_OUTPUT	=> 2;
use constant ST_ERROR	=> 3;	# latched

#### Package variable declarations ####

my %Yes_resp = (
	        "YES"	=> 1,
		"Y"	=> 1,
	        "ON"	=> 1,
	        "TRUE"	=> 1,
		"T"	=> 1,
	        "1"	=> 1
	       );

my @binary_opt = (0, 1);
my @byte_opt = (0, 255);

my $Babble = 0;
my $testactive = 0;	# test mode active

## my $null=[];
my $null=0;
my $zero=0;

# Preloaded methods go here.

sub OS_Error { print Win32::FormatMessage ( Win32::GetLastError() ); }

sub get_tick_count { return Win32::GetTickCount(); }

# test*.t only - suppresses default messages
sub set_no_messages {
    return unless (@_ == 2);
    $testactive = yes_true($_[1]);
}

sub nocarp { return $testactive }

sub internal_buffer { return $RBUF_Size }

sub yes_true {
    my $choice = uc shift;
    return 1 if (exists $Yes_resp{$choice});
    return 0;
}

sub new {
    my $proto = shift;
    my $class = ref($proto) || $proto;
    my $self  = {};
    my $ok    = 0;		# API return value
    my $hr    = 0;		# temporary hashref
    my $fmask = 0;		# temporary for bit banging
    my $fix_baud = 0;
    my $key;
    my $value;
    my $CommPropBlank = " ";

# COMMPROP only used during new
    my $CommProperties		= " "x300; # extra buffer for modems
    my $CP_Length		= 0;
    my $CP_Version		= 0;
    my $CP_ServiceMask		= 0;
    my $CP_Reserved1		= 0;
    my $CP_MaxBaud		= 0;
    my $CP_ProvCapabilities	= 0;
    my $CP_SettableParams	= 0;
    my $CP_SettableBaud		= 0;
    my $CP_SettableData		= 0;
    my $CP_SettableStopParity	= 0;
    my $CP_ProvSpec1		= 0;
    my $CP_ProvSpec2		= 0;
    my $CP_ProvChar_start	= 0;
    my $CP_Filler		= 0;

# MODEMDEVCAPS
    my $MC_ReqSize		= 0;
    my $MC_SpecOffset		= 0;
    my $MC_SpecSize		= 0;
    my $MC_ProvVersion		= 0;
    my $MC_ManfOffset		= 0;
    my $MC_ManfSize		= 0;
    my $MC_ModOffset		= 0;
    my $MC_ModSize		= 0;
    my $MC_VerOffset		= 0;
    my $MC_VerSize		= 0;
    my $MC_DialOpt		= 0;
    my $MC_CallFailTime		= 0;
    my $MC_IdleTime		= 0;
    my $MC_SpkrVol		= 0;
    my $MC_SpkrMode		= 0;
    my $MC_ModOpt		= 0;
    my $MC_MaxDTE		= 0;
    my $MC_MaxDCE		= 0;
    my $MC_Filler		= 0;

$self->{NAME}     = shift;
    my $quiet	      = shift;

$self->{"_HANDLE"}=CreateFile("$self->{NAME}",
				  0xc0000000,
				  0,
				  $null,
				  3,
				  0x40000000,
				  $null);
	# device name
	# GENERIC_READ | GENERIC_WRITE
	# no FILE_SHARE_xx
	# no SECURITY_xx
	# OPEN_EXISTING
	# FILE_FLAG_OVERLAPPED
	# template file

unless ($self->{"_HANDLE"} >= 1) {
        $self->{"_HANDLE"} = 0;
        return 0 if ($quiet);
	return if (nocarp);
        OS_Error;
        carp "can't open device: $self->{NAME}\n";
        return;
    }

# let Win32 know we allowed room for modem properties
    $CP_Length = 300;
    $CP_ProvSpec1 = COMMPROP_INITIALIZED;
    $CommProperties = pack($CP_format0,
		           $CP_Length,
		           $CommPropBlank,
		           $CP_ProvSpec1,
		           $CommPropBlank);

$ok=GetCommProperties($self->{"_HANDLE"}, $CommProperties);

unless ( $ok ) {
        OS_Error;
        carp "can't get COMMPROP block";
        undef $self;
        return;
    }

($CP_Length,
     $CP_Version,
     $CP_ServiceMask,
     $CP_Reserved1,
     $self->{"_MaxTxQueue"},
     $self->{"_MaxRxQueue"},
     $CP_MaxBaud,
     $self->{"_TYPE"},
     $CP_ProvCapabilities,
     $CP_SettableParams,
     $CP_SettableBaud,
     $CP_SettableData,
     $CP_SettableStopParity,
     $self->{WRITEBUF},
     $self->{READBUF},
     $CP_ProvSpec1,
     $CP_ProvSpec2,
     $CP_ProvChar_start,
     $CP_Filler)= unpack($CP_format1, $CommProperties);

if (($CP_Length > 64) and ($self->{"_TYPE"} == PST_RS232)) {
        carp "invalid COMMPROP block length= $CP_Length";
        undef $self;
        return;
    }
    if ($CP_ServiceMask != SP_SERIALCOMM) {
        carp "doesn't claim to be a serial port\n";
        undef $self;
        return;
    }
    if ($self->{"_TYPE"} == PST_MODEM) {
        ($CP_Length,
         $CP_Version,
         $CP_ServiceMask,
         $CP_Reserved1,
         $self->{"_MaxTxQueue"},
         $self->{"_MaxRxQueue"},
         $CP_MaxBaud,
         $self->{"_TYPE"},
         $CP_ProvCapabilities,
         $CP_SettableParams,
         $CP_SettableBaud,
         $CP_SettableData,
         $CP_SettableStopParity,
         $self->{WRITEBUF},
         $self->{READBUF},
         $CP_ProvSpec1,
         $CP_ProvSpec2,
         $CP_ProvChar_start,
         $MC_ReqSize,
         $MC_SpecOffset,
         $MC_SpecSize,
         $MC_ProvVersion,
         $MC_ManfOffset,
         $MC_ManfSize,
         $MC_ModOffset,
         $MC_ModSize,
         $MC_VerOffset,
         $MC_VerSize,
         $MC_DialOpt,
         $MC_CallFailTime,
         $MC_IdleTime,
         $MC_SpkrVol,
         $MC_SpkrMode,
         $MC_ModOpt,
         $MC_MaxDTE,
         $MC_MaxDCE,
         $MC_Filler)= unpack($CP_format6, $CommProperties);

if ($Babble) {
    	    printf "\nMODEMDEVCAPS:\n";
            printf "\$MC_ActualSize= %d\n", $CP_ProvChar_start;
            printf "\$MC_ReqSize= %d\n", $MC_ReqSize;
            printf "\$MC_SpecOffset= %d\n", $MC_SpecOffset;
            printf "\$MC_SpecSize= %d\n", $MC_SpecSize;
    	    if ($MC_SpecOffset) {
                printf "    DeviceSpecificData= %s\n", substr ($CommProperties,
    					 60+$MC_SpecOffset, $MC_SpecSize);
    	    }
            printf "\$MC_ProvVersion= %d\n", $MC_ProvVersion;
            printf "\$MC_ManfOffset= %d\n", $MC_ManfOffset;
            printf "\$MC_ManfSize= %d\n", $MC_ManfSize;
    	    if ($MC_ManfOffset) {
                printf "    Manufacturer= %s\n", substr ($CommProperties,
    					 60+$MC_ManfOffset, $MC_ManfSize);
    	    }
            printf "\$MC_ModOffset= %d\n", $MC_ModOffset;
            printf "\$MC_ModSize= %d\n", $MC_ModSize;
    	    if ($MC_ModOffset) {
                printf "    Model= %s\n", substr ($CommProperties,
    					 60+$MC_ModOffset, $MC_ModSize);
    	    }
            printf "\$MC_VerOffset= %d\n", $MC_VerOffset;
            printf "\$MC_VerSize= %d\n", $MC_VerSize;
    	    if ($MC_VerOffset) {
                printf "    Version= %s\n", substr ($CommProperties,
    					 60+$MC_VerOffset, $MC_VerSize);
    	    }
            printf "\$MC_DialOpt= %lx\n", $MC_DialOpt;
            printf "\$MC_CallFailTime= %d\n", $MC_CallFailTime;
            printf "\$MC_IdleTime= %d\n", $MC_IdleTime;
            printf "\$MC_SpkrVol= %d\n", $MC_SpkrVol;
            printf "\$MC_SpkrMode= %d\n", $MC_SpkrMode;
            printf "\$MC_ModOpt= %lx\n", $MC_ModOpt;
            printf "\$MC_MaxDTE= %d\n", $MC_MaxDTE;
            printf "\$MC_MaxDCE= %d\n", $MC_MaxDCE;
    	    $MC_Filler= $MC_Filler;			# for -w
    	}
##        $MC_ReqSize = 250;
        if ($CP_ProvChar_start != $MC_ReqSize) {
            printf "\nARGH, a Bug! The \$CommProperties buffer must be ";
            printf "at least %d bytes.\n", $MC_ReqSize+60;
        }
    }

##    if (1 | $Babble) {
    if ($Babble) {
        printf "\$CP_Length= %d\n", $CP_Length;
        printf "\$CP_Version= %d\n", $CP_Version;
        printf "\$CP_ServiceMask= %lx\n", $CP_ServiceMask;
        printf "\$CP_Reserved1= %lx\n", $CP_Reserved1;
        printf "\$CP_MaxTxQueue= %lx\n", $self->{"_MaxTxQueue"};
        printf "\$CP_MaxRxQueue= %lx\n", $self->{"_MaxRxQueue"};
        printf "\$CP_MaxBaud= %lx\n", $CP_MaxBaud;
        printf "\$CP_ProvSubType= %lx\n", $self->{"_TYPE"};
        printf "\$CP_ProvCapabilities= %lx\n", $CP_ProvCapabilities;
        printf "\$CP_SettableParams= %lx\n", $CP_SettableParams;
        printf "\$CP_SettableBaud= %lx\n", $CP_SettableBaud;
        printf "\$CP_SettableData= %x\n", $CP_SettableData;
        printf "\$CP_SettableStopParity= %x\n", $CP_SettableStopParity;
        printf "\$CP_CurrentTxQueue= %lx\n", $self->{WRITEBUF};
        printf "\$CP_CurrentRxQueue= %lx\n", $self->{READBUF};
        printf "\$CP_ProvSpec1= %lx\n", $CP_ProvSpec1;
        printf "\$CP_ProvSpec2= %lx\n", $CP_ProvSpec2;
    }

# "private" data
    $self->{"_INIT"}     	= undef;
    $self->{"_DEBUG_C"}    	= 0;
    $self->{"_LATCH"} 		= 0;
    $self->{"_W_BUSY"}		= 0;
    $self->{"_R_BUSY"}		= 0;

$self->{"_TBUFMAX"}		= $self->{"_MaxTxQueue"} ?
					$self->{"_MaxTxQueue"} : LONGsize;
    $self->{"_RBUFMAX"}		= $self->{"_MaxRxQueue"} ?
					$self->{"_MaxRxQueue"} : LONGsize;

# buffers
    $self->{"_R_OVERLAP"}	= " "x24;
    $self->{"_W_OVERLAP"}	= " "x24;
    $self->{"_TIMEOUT"}		= " "x24;
    $self->{"_RBUF"}		= " "x $RBUF_Size;

# allowed setting hashes
    $self->{"_L_BAUD"}		= {};
    $self->{"_L_STOP"}		= {};
    $self->{"_L_PARITY"}	= {};
    $self->{"_L_DATA"}		= {};
    $self->{"_L_HSHAKE"}	= {};

# capability flags

$fmask			= $CP_SettableParams;
    $self->{"_C_BAUD"}     	= $fmask & SP_BAUD;
    $self->{"_C_DATA"}		= $fmask & SP_DATABITS;
    $self->{"_C_STOP"}		= $fmask & SP_STOPBITS;
    $self->{"_C_HSHAKE"}	= $fmask & SP_HANDSHAKING;
    $self->{"_C_PARITY_CFG"}	= $fmask & SP_PARITY;
    $self->{"_C_PARITY_EN"}	= $fmask & SP_PARITY_CHECK;
    $self->{"_C_RLSD_CFG"}	= $fmask & SP_RLSD;

$fmask			= $CP_ProvCapabilities;
    $self->{"_C_RLSD"}		= $fmask & PCF_RLSD;
    $self->{"_C_PARITY_CK"}	= $fmask & PCF_PARITY_CHECK;
    $self->{"_C_DTRDSR"}	= $fmask & PCF_DTRDSR;
    $self->{"_C_16BITMODE"}	= $fmask & PCF_16BITMODE;
    $self->{"_C_RTSCTS"}	= $fmask & PCF_RTSCTS;
    $self->{"_C_XONXOFF"}	= $fmask & PCF_XONXOFF;
    $self->{"_C_XON_CHAR"}	= $fmask & PCF_SETXCHAR;
    $self->{"_C_SPECHAR"}	= $fmask & PCF_SPECIALCHARS;
    $self->{"_C_INT_TIME"}	= $fmask & PCF_INTTIMEOUTS;
    $self->{"_C_TOT_TIME"}	= $fmask & PCF_TOTALTIMEOUTS;

if ($self->{"_C_INT_TIME"}) {
        $self->{"_N_RINT"}	= LONGsize;	# min interval default
    }
    else {
        $self->{"_N_RINT"}	= 0;
    }
    $self->{"_N_RTOT"}	= 0;
    $self->{"_N_RCONST"}	= 0;

if ($self->{"_C_TOT_TIME"}) {
        $self->{"_N_WCONST"}	= 201;	# startup overhead + 1
        $self->{"_N_WTOT"}	= 11;	# per char out + 1
    }
    else {
        $self->{"_N_WTOT"}	= 0;
        $self->{"_N_WCONST"}	= 0;
    }

$hr = \%{$self->{"_L_HSHAKE"}};

if ($self->{"_C_HSHAKE"}) {
        ${$hr}{"xoff"}	= "xoff"	if ($fmask & PCF_XONXOFF);
        ${$hr}{"rts"}	= "rts"		if ($fmask & PCF_RTSCTS);
        ${$hr}{"dtr"}	= "dtr"		if ($fmask & PCF_DTRDSR);
        ${$hr}{"none"}	= "none";
    }
    else { $self->{"_N_HSHAKE"} = undef; }

#### really just using the keys here, so value = Win32_definition
#### in case we ever need it for something else

# first check for programmable baud

$hr = \%{$self->{"_L_BAUD"}};

if ($CP_MaxBaud & BAUD_USER) {
        $fmask		= $CP_SettableBaud;
        ${$hr}{110}	= CBR_110	if ($fmask & BAUD_110);
        ${$hr}{300}	= CBR_300	if ($fmask & BAUD_300);
        ${$hr}{600}	= CBR_600	if ($fmask & BAUD_600);
        ${$hr}{1200}	= CBR_1200	if ($fmask & BAUD_1200);
        ${$hr}{2400}	= CBR_2400	if ($fmask & BAUD_2400);
        ${$hr}{4800}	= CBR_4800	if ($fmask & BAUD_4800);
        ${$hr}{9600}	= CBR_9600	if ($fmask & BAUD_9600);
        ${$hr}{14400}	= CBR_14400	if ($fmask & BAUD_14400);
        ${$hr}{19200}	= CBR_19200	if ($fmask & BAUD_19200);
        ${$hr}{38400}	= CBR_38400	if ($fmask & BAUD_38400);
        ${$hr}{56000}	= CBR_56000	if ($fmask & BAUD_56K);
        ${$hr}{57600}	= CBR_57600	if ($fmask & BAUD_57600);
        ${$hr}{115200}	= CBR_115200	if ($fmask & BAUD_115200);
        ${$hr}{128000}	= CBR_128000	if ($fmask & BAUD_128K);
        ${$hr}{256000}	= CBR_256000	if (0); # reserved ??
    }
    else {
            # get fixed baud from CP_MaxBaud
        $fmask		= $CP_MaxBaud;
        $fix_baud	= 75   		if ($fmask & BAUD_075);
        $fix_baud	= 110  		if ($fmask & BAUD_110);
        $fix_baud	= 134.5		if ($fmask & BAUD_134_5);
        $fix_baud	= 150  		if ($fmask & BAUD_150);
        $fix_baud	= 300  		if ($fmask & BAUD_300);
        $fix_baud	= 600  		if ($fmask & BAUD_600);
        $fix_baud	= 1200 		if ($fmask & BAUD_1200);
        $fix_baud	= 1800 		if ($fmask & BAUD_1800);
        $fix_baud	= 2400 		if ($fmask & BAUD_2400);
        $fix_baud	= 4800 		if ($fmask & BAUD_4800);
        $fix_baud	= 7200 		if ($fmask & BAUD_7200);
        $fix_baud	= 9600 		if ($fmask & BAUD_9600);
        $fix_baud	= 14400		if ($fmask & BAUD_14400);
        $fix_baud	= 19200		if ($fmask & BAUD_19200);
        $fix_baud	= 34800		if ($fmask & BAUD_38400);
        $fix_baud	= 56000		if ($fmask & BAUD_56K);
        $fix_baud	= 57600		if ($fmask & BAUD_57600);
        $fix_baud	= 115200	if ($fmask & BAUD_115200);
        $fix_baud	= 128000	if ($fmask & BAUD_128K);
        ${$hr}{$fix_baud}	= $fix_baud;
        $self->{"_N_BAUD"} = undef;
    }

#### data bits

$fmask	= $CP_SettableData;

if ($self->{"_C_DATA"}) {

$hr = \%{$self->{"_L_DATA"}};

${$hr}{5}	= 5	if ($fmask & DATABITS_5);
        ${$hr}{6}	= 6	if ($fmask & DATABITS_6);
        ${$hr}{7}	= 7	if ($fmask & DATABITS_7);
        ${$hr}{8}	= 8	if ($fmask & DATABITS_8);
        ${$hr}{16}	= 16	if ($fmask & DATABITS_16);
##      ${$hr}{16X}	= 16	if ($fmask & DATABITS_16X);
    }
    else { $self->{"_N_DATA"} = undef; }

#### value = (DCB Win32_definition + 1) so 0 means unchanged

$fmask	= $CP_SettableStopParity;

if ($self->{"_C_STOP"}) {

$hr = \%{$self->{"_L_STOP"}};

${$hr}{1}	= 1 + ONESTOPBIT	if ($fmask & STOPBITS_10);
        ${$hr}{1.5}	= 1 + ONE5STOPBITS	if ($fmask & STOPBITS_15);
        ${$hr}{2}	= 1 + TWOSTOPBITS	if ($fmask & STOPBITS_20);
    }
    else { $self->{"_N_STOP"} = undef; }

if ($self->{"_C_PARITY_CFG"}) {

$hr = \%{$self->{"_L_PARITY"}};

${$hr}{"none"}	= 1 + NOPARITY		if ($fmask & PARITY_NONE);
        ${$hr}{"even"}	= 1 + EVENPARITY	if ($fmask & PARITY_EVEN);
        ${$hr}{"odd"}	= 1 + ODDPARITY		if ($fmask & PARITY_ODD);
        ${$hr}{"mark"}	= 1 + MARKPARITY	if ($fmask & PARITY_MARK);
        ${$hr}{"space"}	= 1 + SPACEPARITY	if ($fmask & PARITY_SPACE);
    }
    else { $self->{"_N_PARITY"} = undef; }

$hr = 0;	# no loops

# changable dcb parameters
    # 0 = no change requested
    # mask_on: requested value for OR
    # mask_off: complement of requested value for AND

$self->{"_N_FM_ON"}		= 0;
    $self->{"_N_FM_OFF"}	= 0;

$self->{"_N_AUX_ON"}	= 0;
    $self->{"_N_AUX_OFF"}	= 0;

### "VALUE" is initialized from DCB by default (but also in %validate)

# 0 = no change requested
    # integer: requested value or (value+1 if 0 is a legal value)
    # binary: 1=false requested, 2=true requested

$self->{"_N_XONLIM"}     	= 0;
    $self->{"_N_XOFFLIM"}     	= 0;
    $self->{"_N_XOFFCHAR"}     	= 0;
    $self->{"_N_XONCHAR"}     	= 0;
    $self->{"_N_ERRCHAR"}     	= 0;
    $self->{"_N_EOFCHAR"}     	= 0;
    $self->{"_N_EVTCHAR"}     	= 0;
    $self->{"_N_BINARY"}     	= 0;
    $self->{"_N_PARITY_EN"}    	= 0;

### "_N_items" for save/start

$self->{"_N_READBUF"}	= 0;
    $self->{"_N_WRITEBUF"}	= 0;
    $self->{"_N_HSHAKE"}	= 0;

### The "required" DCB values are deliberately NOT defined. That way,
    ### write_settings can verify they "exist" to assure they got set.
    ###		$self->{"_N_BAUD"}
    ###		$self->{"_N_DATA"}
    ###		$self->{"_N_STOP"}
    ###		$self->{"_N_PARITY"}

$self->{"_R_EVENT"} = CreateEvent($null,	# no security
  	                              1,	# explicit reset req
  	                              0,	# initial event reset
  	                              $null);	# no name
    unless ($self->{"_R_EVENT"}) {
        OS_Error;
        carp "could not create required read event";
        undef $self;
        return;
    }

$self->{"_W_EVENT"} = CreateEvent($null,	# no security
  	                              1,	# explicit reset req
  	       	                      0,	# initial event reset
  	       	                      $null);	# no name
    unless ($self->{"_W_EVENT"}) {
        OS_Error;
        carp "could not create required write event";
        undef $self;
        return;
    }
    $self->{"_R_OVERLAP"} = pack($OVERLAPPEDformat,
          			 $zero,		# osRead_Internal,
          			 $zero,		# osRead_InternalHigh,
          			 $zero,		# osRead_Offset,
          			 $zero,		# osRead_OffsetHigh,
				 $self->{"_R_EVENT"});

$self->{"_W_OVERLAP"} = pack($OVERLAPPEDformat,
          			 $zero,		# osWrite_Internal,
          			 $zero,		# osWrite_InternalHigh,
          			 $zero,		# osWrite_Offset,
          			 $zero,		# osWrite_OffsetHigh,
				 $self->{"_W_EVENT"});

# Device Control Block (DCB)
    unless ( fetch_DCB ($self) ) {
        carp "can't read Device Control Block for $self->{NAME}\n";
        undef $self;
        return;
    }
    $self->{"_L_BAUD"}{$self->{BAUD}} = $self->{BAUD}; # actual must be ok

# Read Timeouts
    unless ( GetCommTimeouts($self->{"_HANDLE"}, $self->{"_TIMEOUT"}) ) {
        carp "Error in GetCommTimeouts";
        undef $self;
        return;
    }

($self->{RINT},
     $self->{RTOT},
     $self->{RCONST},
     $self->{WTOT},
     $self->{WCONST})= unpack($TIMEOUTformat, $self->{"_TIMEOUT"});

bless ($self, $class);
    return $self;
}

sub fetch_DCB {
    my $self = shift;
    my $ok;
    my $hr;
    my $fmask;
    my $key;
    my $value;
    my $dcb = " "x32;

GetCommState($self->{"_HANDLE"}, $dcb) or return;

($self->{"_DCBLength"},
     $self->{BAUD},
     $self->{"_BitMask"},
     $self->{"_ResvWORD"},
     $self->{XONLIM},
     $self->{XOFFLIM},
     $self->{DATA},
     $self->{"_Parity"},
     $self->{"_StopBits"},
     $self->{XONCHAR},
     $self->{XOFFCHAR},
     $self->{ERRCHAR},
     $self->{EOFCHAR},
     $self->{EVTCHAR},
     $self->{"_PackWORD"})= unpack($DCBformat, $dcb);

if ($self->{"_DCBLength"} > 32) {
        carp "invalid DCB block length";
        return;
    }

if ($Babble) {
        printf "DCBLength= %d\n", $self->{"_DCBLength"};
        printf "BaudRate= %d\n", $self->{BAUD};
        printf "BitMask= %lx\n", $self->{"_BitMask"};
        printf "ResvWORD= %x\n", $self->{"_ResvWORD"};
        printf "XonLim= %x\n", $self->{XONLIM};
        printf "XoffLim= %x\n", $self->{XOFFLIM};
        printf "ByteSize= %d\n", $self->{DATA};
        printf "Parity= %d\n", $self->{"_Parity"};
        printf "StopBits= %d\n", $self->{"_StopBits"};
        printf "XonChar= %x\n", $self->{XONCHAR};
        printf "XoffChar= %x\n", $self->{XOFFCHAR};
        printf "ErrorChar= %x\n", $self->{ERRCHAR};
        printf "EofChar= %x\n", $self->{EOFCHAR};
        printf "EvtChar= %x\n", $self->{EVTCHAR};
        printf "PackWORD= %x\n", $self->{"_PackWORD"};
        printf "handle= %d\n\n", $self->{"_HANDLE"};
    }

$fmask = 1 + $self->{"_StopBits"};
    while (($key, $value) = each %{ $self->{"_L_STOP"} }) {
        if ($value == $fmask) {
	   $self->{STOP}	= $key;
	}
    }

$fmask = 1 + $self->{"_Parity"};
    while (($key, $value) = each %{ $self->{"_L_PARITY"} }) {
        if ($value == $fmask) {
           $self->{PARITY}	= $key;
	}
    }

$fmask = $self->{"_BitMask"};

$hr = DTR_CONTROL_HANDSHAKE;
    $ok = RTS_CONTROL_HANDSHAKE;

if ($fmask & ( $hr << 4) ) {
        $self->{HSHAKE} = "dtr";
    }
    elsif ($fmask & ( $ok << 12) ) {
        $self->{HSHAKE} = "rts";
    }
    elsif ($fmask & ( FM_fOutX | FM_fInX ) ) {
        $self->{HSHAKE} = "xoff";
    }
    else {
        $self->{HSHAKE} = "none";
    }

$self->{BINARY} = ($fmask & FM_fBinary);
    $self->{PARITY_EN} = ($fmask & FM_fParity);

if ($fmask & FM_fDummy2) {
        carp "Unknown DCB Flow Mask Bit in $self->{NAME}";
    }
    1;
}

sub init_done {
    my $self = shift;
    return 0 unless (defined $self->{"_INIT"});
    return $self->{"_INIT"};
}

sub update_DCB {
    my $self = shift;
    my $ok = 0;

return unless (defined $self->{"_INIT"});

fetch_DCB ($self);

if ($self->{"_N_HSHAKE"}) {
        $self->{HSHAKE} = $self->{"_N_HSHAKE"};
        if ($self->{HSHAKE} eq "dtr" ) {
            $self->{"_N_FM_ON"}		= 0x1028;
            $self->{"_N_FM_OFF"}	= 0xffffdceb;
	}
        elsif ($self->{HSHAKE} eq "rts" ) {
            $self->{"_N_FM_ON"}		= 0x2014;
            $self->{"_N_FM_OFF"}	= 0xffffecd7;
	}
        elsif ($self->{HSHAKE} eq "xoff" ) {
            $self->{"_N_FM_ON"}		= 0x1310;
            $self->{"_N_FM_OFF"}	= 0xffffdfd3;
	}
        else {
            $self->{"_N_FM_ON"}		= 0x1010;
            $self->{"_N_FM_OFF"}	= 0xffffdcd3;
	}
        $self->{"_N_HSHAKE"} = 0;
    }

if ($self->{"_N_PARITY_EN"}) {
        if (2 == $self->{"_N_PARITY_EN"}) {
            $self->{"_N_FM_ON"}		|= FM_fParity;		# enable
            if ($self->{"_N_FM_OFF"}) {
                $self->{"_N_FM_OFF"}	|= FM_fParity;
	    }
            else { $self->{"_N_FM_OFF"}	= LONGsize; }
	}
	else {
            if ($self->{"_N_FM_ON"}) {
                $self->{"_N_FM_ON"}	&= ~FM_fParity;		# disable
	    }
            if ($self->{"_N_FM_OFF"}) {
                $self->{"_N_FM_OFF"}	&= ~FM_fParity;
	    }
            else { $self->{"_N_FM_OFF"}	= ~FM_fParity; }
	}
## DEBUG ##
##	printf "_N_FM_ON=%lx\n", $self->{"_N_FM_ON"}; ## DEBUG ##
##	printf "_N_FM_OFF=%lx\n", $self->{"_N_FM_OFF"}; ## DEBUG ##
## DEBUG ##
        $self->{"_N_PARITY_EN"} = 0;
    }

## DEBUG ##
##	printf "_N_AUX_ON=%lx\n", $self->{"_N_AUX_ON"}; ## DEBUG ##
##	printf "_N_AUX_OFF=%lx\n", $self->{"_N_AUX_OFF"}; ## DEBUG ##
## DEBUG ##

if ( $self->{"_N_AUX_ON"} or $self->{"_N_AUX_OFF"} ) {
        if ( $self->{"_N_FM_OFF"} ) {
            $self->{"_N_FM_OFF"} &= $self->{"_N_AUX_OFF"};
	}
	else {
            $self->{"_N_FM_OFF"} = $self->{"_N_AUX_OFF"};
	}
        $self->{"_N_FM_ON"}	|= $self->{"_N_AUX_ON"};
        $self->{"_N_AUX_ON"}	= 0;
        $self->{"_N_AUX_OFF"}	= 0;
    }
## DEBUG ##
##	printf "_N_FM_ON=%lx\n", $self->{"_N_FM_ON"}; ## DEBUG ##
##	printf "_N_FM_OFF=%lx\n", $self->{"_N_FM_OFF"}; ## DEBUG ##
## DEBUG ##

if ( $self->{"_N_FM_ON"} or $self->{"_N_FM_OFF"} ) {
        $self->{"_BitMask"}	&= $self->{"_N_FM_OFF"};
        $self->{"_BitMask"}	|= $self->{"_N_FM_ON"};
        $self->{"_N_FM_ON"}	= 0;
        $self->{"_N_FM_OFF"}	= 0;
    }

if ($self->{"_N_XONLIM"}) {
        $self->{XONLIM} = $self->{"_N_XONLIM"} - 1;
        $self->{"_N_XONLIM"} = 0;
    }

if ($self->{"_N_XOFFLIM"}) {
        $self->{XOFFLIM} = $self->{"_N_XOFFLIM"} - 1;
        $self->{"_N_XOFFLIM"} = 0;
    }

if ($self->{"_N_BAUD"}) {
        $self->{BAUD} = $self->{"_N_BAUD"};
        $self->{"_N_BAUD"} = 0;
    }

if ($self->{"_N_DATA"}) {
        $self->{DATA} = $self->{"_N_DATA"};
        $self->{"_N_DATA"} = 0;
    }

if ($self->{"_N_STOP"}) {
        $self->{"_StopBits"} = $self->{"_N_STOP"} - 1;
        $self->{"_N_STOP"} = 0;
    }

if ($self->{"_N_PARITY"}) {
        $self->{"_Parity"} = $self->{"_N_PARITY"} - 1;
        $self->{"_N_PARITY"} = 0;
    }

if ($self->{"_N_XONCHAR"}) {
        $self->{XONCHAR} = $self->{"_N_XONCHAR"} - 1;
        $self->{"_N_XONCHAR"} = 0;
    }

if ($self->{"_N_XOFFCHAR"}) {
        $self->{XOFFCHAR} = $self->{"_N_XOFFCHAR"} - 1;
        $self->{"_N_XOFFCHAR"} = 0;
    }

if ($self->{"_N_ERRCHAR"}) {
        $self->{ERRCHAR} = $self->{"_N_ERRCHAR"} - 1;
        $self->{"_N_ERRCHAR"} = 0;
    }

if ($self->{"_N_EOFCHAR"}) {
        $self->{EOFCHAR} = $self->{"_N_EOFCHAR"} - 1;
        $self->{"_N_EOFCHAR"} = 0;
    }

if ($self->{"_N_EVTCHAR"}) {
        $self->{EVTCHAR} = $self->{"_N_EVTCHAR"} - 1;
        $self->{"_N_EVTCHAR"} = 0;
    }

my $dcb = pack($DCBformat,
		   $self->{"_DCBLength"},
		   $self->{BAUD},
		   $self->{"_BitMask"},
		   $self->{"_ResvWORD"},
		   $self->{XONLIM},
		   $self->{XOFFLIM},
		   $self->{DATA},
		   $self->{"_Parity"},
		   $self->{"_StopBits"},
		   $self->{XONCHAR},
		   $self->{XOFFCHAR},
		   $self->{ERRCHAR},
		   $self->{EOFCHAR},
		   $self->{EVTCHAR},
		   $self->{"_PackWORD"});

if ( SetCommState($self->{"_HANDLE"}, $dcb) ) {
        print "updated DCB for $self->{NAME}\n" if ($Babble);
## DEBUG ##
##        printf "DEBUG BitMask= %lx\n", $self->{"_BitMask"}; ## DEBUG ##
## DEBUG ##
    }
    else {
	carp "SetCommState failed";
        OS_Error;
        if ($Babble) {
	    printf "\ntried to write:\n";
            printf "DCBLength= %d\n", $self->{"_DCBLength"};
            printf "BaudRate= %d\n", $self->{BAUD};
            printf "BitMask= %lx\n", $self->{"_BitMask"};
            printf "ResvWORD= %x\n", $self->{"_ResvWORD"};
            printf "XonLim= %x\n", $self->{XONLIM};
            printf "XoffLim= %x\n", $self->{XOFFLIM};
            printf "ByteSize= %d\n", $self->{DATA};
            printf "Parity= %d\n", $self->{"_Parity"};
            printf "StopBits= %d\n", $self->{"_StopBits"};
            printf "XonChar= %x\n", $self->{XONCHAR};
            printf "XoffChar= %x\n", $self->{XOFFCHAR};
            printf "ErrorChar= %x\n", $self->{ERRCHAR};
            printf "EofChar= %x\n", $self->{EOFCHAR};
            printf "EvtChar= %x\n", $self->{EVTCHAR};
            printf "PackWORD= %x\n", $self->{"_PackWORD"};
            printf "handle= %d\n", $self->{"_HANDLE"};
        }
    }
}

sub initialize {
    my $self = shift;
    my $item;
    my $fault = 0;
    foreach $item (@_) {
        unless (exists $self->{"_N_$item"}) {
            # must be "exists" so undef=not_settable
            $fault++;
            nocarp or carp "Missing REQUIRED setting for $item";
        }
    }
    unless ($self->{"_INIT"}) {
        $self->{"_INIT"}	= 1	 unless ($fault);
        $self->{"_BitMask"}	= 0x1011;
        $self->{XONLIM}		= 100	 unless ($self->{"_N_XONLIM"});
        $self->{XOFFLIM}	= 100	 unless ($self->{"_N_XOFFLIM"});
        $self->{XONCHAR}	= 0x11	 unless ($self->{"_N_XONCHAR"});
        $self->{XOFFCHAR}	= 0x13	 unless ($self->{"_N_XOFFCHAR"});
        $self->{ERRCHAR}	= 0	 unless ($self->{"_N_ERRCHAR"});
        $self->{EOFCHAR}	= 0	 unless ($self->{"_N_EOFCHAR"});
        $self->{EVTCHAR}	= 0	 unless ($self->{"_N_EVTCHAR"});

update_timeouts($self);
    }

if ($self->{"_N_READBUF"} or $self->{"_N_WRITEBUF"}) {
        if ($self->{"_N_READBUF"}) {
            $self->{READBUF} = $self->{"_N_READBUF"};
	}
        if ($self->{"_N_WRITEBUF"}) {
            $self->{WRITEBUF} = $self->{"_N_WRITEBUF"};
	}
        $self->{"_N_READBUF"} = 0;
        $self->{"_N_WRITEBUF"} = 0;
	SetupComm($self->{"_HANDLE"}, $self->{READBUF}, $self->{WRITEBUF});
    }
    purge_all($self);
    return $fault;
}

sub is_status {
    my $self		= shift;
    my $ok		= 0;
    my $error_p		= " "x4;
    my $CommStatus	= " "x12;

if (@_ and $testactive) {
        $self->{"_LATCH"} |= shift;
    }

$ok=ClearCommError($self->{"_HANDLE"}, $error_p, $CommStatus);

my $Error_BitMask	= unpack("L", $error_p);
    $self->{"_LATCH"} |= $Error_BitMask;
    my @stat = unpack($COMSTATformat, $CommStatus);
    push @stat, $self->{"_LATCH"};

$stat[ST_BLOCK] &= BM_AllBits;
    if ( $Babble or $self->{"_DEBUG_C"} ) {
        printf "Blocking Bits= %d\n", $stat[ST_BLOCK];
        printf "Input Queue= %d\n", $stat[ST_INPUT];
        printf "Output Queue= %d\n", $stat[ST_OUTPUT];
        printf "Latched Errors= %d\n", $stat[ST_ERROR];
        printf "ok= %d\n", $ok;
    }
    return ($ok ? @stat : undef);
}

sub reset_error {
    my $self = shift;
    my $was  = $self->{"_LATCH"};
    $self->{"_LATCH"} = 0;
    return $was;
}

sub can_baud {
    my $self = shift;
    return $self->{"_C_BAUD"};
}

sub can_databits {
    my $self = shift;
    return $self->{"_C_DATA"};
}

sub can_stopbits {
    my $self = shift;
    return $self->{"_C_STOP"};
}

sub can_dtrdsr {
    my $self = shift;
    return $self->{"_C_DTRDSR"};
}

sub can_handshake {
    my $self = shift;
    return $self->{"_C_HSHAKE"};
}

sub can_parity_check {
    my $self = shift;
    return $self->{"_C_PARITY_CK"};
}

sub can_parity_config {
    my $self = shift;
    return $self->{"_C_PARITY_CFG"};
}

sub can_parity_enable {
    my $self = shift;
    return $self->{"_C_PARITY_EN"};
}

sub can_rlsd_config {
    my $self = shift;
    return $self->{"_C_RLSD_CFG"};
}

sub can_rlsd {
    my $self = shift;
    return $self->{"_C_RLSD"};
}

sub can_16bitmode {
    my $self = shift;
    return $self->{"_C_16BITMODE"};
}

sub can_ioctl {
    my $self = shift;
    return 0;	# unix only
}

sub is_rs232 {
    my $self = shift;
    return ($self->{"_TYPE"} == PST_RS232);
}

sub is_modem {
    my $self = shift;
    return ($self->{"_TYPE"} == PST_MODEM);
}

sub can_rtscts {
    my $self = shift;
    return $self->{"_C_RTSCTS"};
}

sub can_xonxoff {
    my $self = shift;
    return $self->{"_C_XONXOFF"};
}

sub can_xon_char {
    my $self = shift;
    return $self->{"_C_XON_CHAR"};
}

sub can_spec_char {
    my $self = shift;
    return $self->{"_C_SPECHAR"};
}

sub can_interval_timeout {
    my $self = shift;
    return $self->{"_C_INT_TIME"};
}

sub can_total_timeout {
    my $self = shift;
    return $self->{"_C_TOT_TIME"};
}

sub is_handshake {
    my $self = shift;
    if (@_) {
        return unless $self->{"_C_HSHAKE"};
        return unless (defined $self->{"_L_HSHAKE"}{$_[0]});
        $self->{"_N_HSHAKE"} = $self->{"_L_HSHAKE"}{$_[0]};
        update_DCB ($self);
    }
    return unless fetch_DCB ($self);
    return $self->{HSHAKE};
}

sub are_handshake {
    my $self = shift;
    return unless $self->{"_C_HSHAKE"};
    return if (@_);
    return keys(%{$self->{"_L_HSHAKE"}});
}

sub is_baudrate {
    my $self = shift;
    if (@_) {
        return unless $self->{"_C_BAUD"};
        return unless (defined $self->{"_L_BAUD"}{$_[0]});
        $self->{"_N_BAUD"} = int shift;
        update_DCB ($self);
    }
    return unless fetch_DCB ($self);
    return $self->{BAUD};
}

sub are_baudrate {
    my $self = shift;
    return unless $self->{"_C_BAUD"};
    return if (@_);
    return keys(%{$self->{"_L_BAUD"}});
}

sub is_parity {
    my $self = shift;
    if (@_) {
        return unless $self->{"_C_PARITY_CFG"};
        return unless (defined $self->{"_L_PARITY"}{$_[0]});
        $self->{"_N_PARITY"} = $self->{"_L_PARITY"}{$_[0]};
        update_DCB ($self);
    }
    return unless fetch_DCB ($self);
    return $self->{PARITY};
}

sub are_parity {
    my $self = shift;
    return unless $self->{"_C_PARITY_CFG"};
    return if (@_);
    return keys(%{$self->{"_L_PARITY"}});
}

sub is_databits {
    my $self = shift;
    if (@_) {
        return unless $self->{"_C_DATA"};
        return unless (defined $self->{"_L_DATA"}{$_[0]});
        $self->{"_N_DATA"} = $self->{"_L_DATA"}{$_[0]};
        update_DCB ($self);
    }
    return unless fetch_DCB ($self);
    return $self->{DATA};
}

sub are_databits {
    my $self = shift;
    return unless $self->{"_C_DATA"};
    return if (@_);
    return keys(%{$self->{"_L_DATA"}});
}

sub is_stopbits {
    my $self = shift;
    if (@_) {
        return unless $self->{"_C_STOP"};
        return unless (defined $self->{"_L_STOP"}{$_[0]});
        $self->{"_N_STOP"} = $self->{"_L_STOP"}{$_[0]};
        update_DCB ($self);
    }
    return unless fetch_DCB ($self);
    return $self->{STOP};
}

sub are_stopbits {
    my $self = shift;
    return unless $self->{"_C_STOP"};
    return if (@_);
    return keys(%{$self->{"_L_STOP"}});
}

# single value for save/start
sub is_read_buf {
    my $self = shift;
    if (@_) { $self->{"_N_READBUF"} = int shift; }
    return $self->{READBUF};
}

# single value for save/start
sub is_write_buf {
    my $self = shift;
    if (@_) { $self->{"_N_WRITEBUF"} = int shift; }
    return $self->{WRITEBUF};
}

sub is_buffers {
    my $self = shift;

return unless (@_ == 2);
    my $rbuf = shift;
    my $wbuf = shift;
    SetupComm($self->{"_HANDLE"}, $rbuf, $wbuf) or return;
    $self->{"_N_READBUF"}	= 0;
    $self->{"_N_WRITEBUF"}	= 0;
    $self->{READBUF}		= $rbuf;
    $self->{WRITEBUF}		= $wbuf;
    1;
}

sub read_bg {
    return unless (@_ == 2);
    my $self = shift;
    my $wanted = shift;
    return unless ($wanted > 0);
    if ($self->{"_R_BUSY"}) {
	nocarp or carp "Second Read attempted before First is done";
	return;
    }
    my $got_p = " "x4;
    my $ok;
    my $got = 0;
    if ($wanted > $RBUF_Size) {
        $wanted = $RBUF_Size;
        warn "read buffer limited to $RBUF_Size bytes at the moment";
    }
    $self->{"_R_BUSY"} = 1;

$ok=ReadFile( $self->{"_HANDLE"},
    		  $self->{"_RBUF"},
		  $wanted,
		  $got_p,
		  $self->{"_R_OVERLAP"});

if ($ok) {
        $got = unpack("L", $got_p);
        $self->{"_R_BUSY"} = 0;
    }
    return $got;
}

sub write_bg {
    return unless (@_ == 2);
    my $self = shift;
    my $wbuf = shift;
    if ($self->{"_W_BUSY"}) {
	nocarp or carp "Second Write attempted before First is done";
	return;
    }
    my $ok;
    my $got_p = " "x4;
    return 0 if ($wbuf eq "");
    my $lbuf = length ($wbuf);
    my $written = 0;
    $self->{"_W_BUSY"} = 1;

$ok=WriteFile( $self->{"_HANDLE"},
		   $wbuf,
		   $lbuf,
		   $got_p,
		   $self->{"_W_OVERLAP"});

if ($ok) {
        $written = unpack("L", $got_p);
        $self->{"_W_BUSY"} = 0;
    }
    if ($Babble) {
	print "error=$ok\n";
	print "wbuf=$wbuf\n";
	print "lbuf=$lbuf\n";
	print "write_bg=$written\n";
    }
    return $written;
}

sub read_done {
    return unless (@_ == 2);
    my $self = shift;
    my $wait = yes_true ( shift );
    my $ov;
    my $got_p = " "x4;
    my $wanted = 0;
    $self->{"_R_BUSY"} = 1;

$ov=GetOverlappedResult( $self->{"_HANDLE"},
			     $self->{"_R_OVERLAP"},
			     $got_p,
			     $wait);
    if ($ov) {
        $wanted = unpack("L", $got_p);
	$self->{"_R_BUSY"} = 0;
	print "read_done=$wanted\n" if ($Babble);
        return (1, $wanted, substr($self->{"_RBUF"}, 0, $wanted));
    }
    return (0, 0, "");
}

sub write_done {
    return unless (@_ == 2);
    my $self = shift;
    my $wait = yes_true ( shift );
    my $ov;
    my $got_p = " "x4;
    my $written = 0;
    $self->{"_W_BUSY"} = 1;

$ov=GetOverlappedResult( $self->{"_HANDLE"},
			     $self->{"_W_OVERLAP"},
			     $got_p,
			     $wait);
    if ($ov) {
        $written = unpack("L", $got_p);
	$self->{"_W_BUSY"} = 0;
	print "write_done=$written\n" if ($Babble);
        return (1, $written);
    }
    return (0, $written);
}

sub purge_all {
    my $self = shift;
    return if (@_);

# PURGE_TXABORT | PURGE_RXABORT | PURGE_TXCLEAR | PURGE_RXCLEAR
    unless ( PurgeComm($self->{"_HANDLE"}, 0x0000000f) ) {
        carp "Error in PurgeComm";
        OS_Error;
	return;
    }
    $self->{"_R_BUSY"} = 0;
    $self->{"_W_BUSY"} = 0;
    return 1;
}

sub purge_rx {
    my $self = shift;
    return if (@_);

# PURGE_RXABORT | PURGE_RXCLEAR
    unless ( PurgeComm($self->{"_HANDLE"}, 0x0000000a) ) {
        OS_Error;
        carp "Error in PurgeComm";
	return;
    }
    $self->{"_R_BUSY"} = 0;
    return 1;
}

sub purge_tx {
    my $self = shift;
    return if (@_);

# PURGE_TXABORT | PURGE_TXCLEAR
    unless ( PurgeComm($self->{"_HANDLE"}, 0x00000005) ) {
        OS_Error;
        carp "Error in PurgeComm";
	return;
    }
    $self->{"_W_BUSY"} = 0;
    return 1;
}

sub are_buffers {
    my $self = shift;
    return if (@_);
    return ($self->{READBUF}, $self->{WRITEBUF});
}

sub buffer_max {
    my $self = shift;
    return if (@_);
    return ($self->{"_RBUFMAX"}, $self->{"_TBUFMAX"});
}

sub suspend_tx {
    my $self = shift;
    return if (@_);
    return SetCommBreak($self->{"_HANDLE"});
}

sub resume_tx {
    my $self = shift;
    return if (@_);
    return ClearCommBreak($self->{"_HANDLE"});
}

sub xmit_imm_char {
    my $self = shift;
    return unless (@_ == 1);
    my $v = int shift;
    unless ( TransmitCommChar($self->{"_HANDLE"}, $v) ) {
	carp "Can't transmit char: $v";
	return;
    }
    1;
}

sub is_xon_char {
    my $self = shift;
    if ((@_ == 1) and $self->{"_C_XON_CHAR"}) {
        $self->{"_N_XONCHAR"} = 1 + shift;
        update_DCB ($self);
    }
    else {
        return unless fetch_DCB ($self);
    }
    return $self->{XONCHAR};
}

sub is_xoff_char {
    my $self = shift;
    if ((@_ == 1) and $self->{"_C_XON_CHAR"}) {
        $self->{"_N_XOFFCHAR"} = 1 + shift;
        update_DCB ($self);
    }
    else {
        return unless fetch_DCB ($self);
    }
    return $self->{XOFFCHAR};
}

sub is_eof_char {
    my $self = shift;
    if ((@_ == 1) and $self->{"_C_SPECHAR"}) {
        $self->{"_N_EOFCHAR"} = 1 + shift;
        update_DCB ($self);
    }
    else {
        return unless fetch_DCB ($self);
    }
    return $self->{EOFCHAR};
}

sub is_event_char {
    my $self = shift;
    if ((@_ == 1) and $self->{"_C_SPECHAR"}) {
        $self->{"_N_EVTCHAR"} = 1 + shift;
        update_DCB ($self);
    }
    else {
        return unless fetch_DCB ($self);
    }
    return $self->{EVTCHAR};
}

sub is_error_char {
    my $self = shift;
    if ((@_ == 1) and $self->{"_C_SPECHAR"}) {
        $self->{"_N_ERRCHAR"} = 1 + shift;
        update_DCB ($self);
    }
    else {
        return unless fetch_DCB ($self);
    }
    return $self->{ERRCHAR};
}

sub is_xon_limit {
    my $self = shift;
    if (@_) {
	return unless ($self->{"_C_XONXOFF"});
	my $v = int shift;
	return if (($v < 0) or ($v > SHORTsize));
        $self->{"_N_XONLIM"} = ++$v;
        update_DCB ($self);
    }
    else {
        return unless fetch_DCB ($self);
    }
    return $self->{XONLIM};
}

sub is_xoff_limit {
    my $self = shift;
    if (@_) {
	return unless ($self->{"_C_XONXOFF"});
	my $v = int shift;
	return if (($v < 0) or ($v > SHORTsize));
        $self->{"_N_XOFFLIM"} = ++$v;
        update_DCB ($self);
    }
    else {
        return unless fetch_DCB ($self);
    }
    return $self->{XOFFLIM};
}

sub is_read_interval {
    my $self = shift;
    if (@_) {
        return unless ($self->{"_C_INT_TIME"});
	my $v = int shift;
	return if (($v < 0) or ($v > LONGsize));
        if ($v == LONGsize) {
            $self->{"_N_RINT"} = $v; # Win32 uses as flag
	}
	else {
            $self->{"_N_RINT"} = ++$v;
	}
        return unless update_timeouts ($self);
    }
    return $self->{RINT};
}

sub is_read_char_time {
    my $self = shift;
    if (@_) {
        return unless ($self->{"_C_TOT_TIME"});
	my $v = int shift;
	return if (($v < 0) or ($v >= LONGsize));
        $self->{"_N_RTOT"} = ++$v;
        return unless update_timeouts ($self);
    }
    return $self->{RTOT};
}

sub is_read_const_time {
    my $self = shift;
    if (@_) {
        return unless ($self->{"_C_TOT_TIME"});
	my $v = int shift;
	return if (($v < 0) or ($v >= LONGsize));
        $self->{"_N_RCONST"} = ++$v;
        return unless update_timeouts ($self);
    }
    return $self->{RCONST};
}

sub is_write_const_time {
    my $self = shift;
    if (@_) {
        return unless ($self->{"_C_TOT_TIME"});
	my $v = int shift;
	return if (($v < 0) or ($v >= LONGsize));
        $self->{"_N_WCONST"} = ++$v;
        return unless update_timeouts ($self);
    }
    return $self->{WCONST};
}

sub is_write_char_time {
    my $self = shift;
    if (@_) {
        return unless ($self->{"_C_TOT_TIME"});
	my $v = int shift;
	return if (($v < 0) or ($v >= LONGsize));
        $self->{"_N_WTOT"} = ++$v;
        return unless update_timeouts ($self);
    }
    return $self->{WTOT};
}

sub update_timeouts {
    return unless (@_ == 1);
    my $self = shift;
    unless ( GetCommTimeouts($self->{"_HANDLE"}, $self->{"_TIMEOUT"}) ) {
        carp "Error in GetCommTimeouts";
        return;
    }

($self->{RINT},
     $self->{RTOT},
     $self->{RCONST},
     $self->{WTOT},
     $self->{WCONST})= unpack($TIMEOUTformat, $self->{"_TIMEOUT"});

if ($self->{"_N_RINT"}) {
        if ($self->{"_N_RINT"} == LONGsize) {
            $self->{RINT} = $self->{"_N_RINT"}; # Win32 uses as flag
	}
	else {
            $self->{RINT} = $self->{"_N_RINT"} -1;
	}
        $self->{"_N_RINT"} = 0;
    }

if ($self->{"_N_RTOT"}) {
        $self->{RTOT} = $self->{"_N_RTOT"} -1;
        $self->{"_N_RTOT"} = 0;
    }

if ($self->{"_N_RCONST"}) {
        $self->{RCONST} = $self->{"_N_RCONST"} -1;
        $self->{"_N_RCONST"} = 0;
    }

if ($self->{"_N_WTOT"}) {
        $self->{WTOT} = $self->{"_N_WTOT"} -1;
        $self->{"_N_WTOT"} = 0;
    }

if ($self->{"_N_WCONST"}) {
        $self->{WCONST} = $self->{"_N_WCONST"} -1;
        $self->{"_N_WCONST"} = 0;
    }

$self->{"_TIMEOUT"} = pack($TIMEOUTformat,
		               $self->{RINT},
		               $self->{RTOT},
		               $self->{RCONST},
		               $self->{WTOT},
		               $self->{WCONST});

if ( SetCommTimeouts($self->{"_HANDLE"}, $self->{"_TIMEOUT"}) ) {
	return 1;
    }
    else {
        carp "Error in SetCommTimeouts";
        return;
    }
}

# true/false parameters

sub is_binary {
    my $self = shift;
    if (@_) {
        $self->{"_N_BINARY"} = 1 + yes_true ( shift );
        update_DCB ($self);
    }
    else {
        return unless fetch_DCB ($self);
    }
    ### printf "_BitMask=%lx\n", $self->{"_BitMask"}; ###
    return ($self->{"_BitMask"} & FM_fBinary);
}

sub is_parity_enable {
    my $self = shift;
    if (@_) {
        $self->{"_N_PARITY_EN"} = 1 + yes_true ( shift );
        update_DCB ($self);
    }
    return unless fetch_DCB ($self);
##    printf "_BitMask=%lx\n", $self->{"_BitMask"}; ## DEBUG ##
    return ($self->{"_BitMask"} & FM_fParity);
}

sub ignore_null {
    my $self = shift;
    if (@_) {
        if ($self->{"_N_AUX_OFF"}) {
            $self->{"_N_AUX_OFF"} &= ~FM_fNull;
	}
	else {
            $self->{"_N_AUX_OFF"} = ~FM_fNull;
	}
        if ( yes_true ( shift ) ) {
            $self->{"_N_AUX_ON"} |= FM_fNull;
	}
        update_DCB ($self);
    }
    else {
        return unless fetch_DCB ($self);
    }
##    printf "_BitMask=%lx\n", $self->{"_BitMask"}; ###
    return ($self->{"_BitMask"} & FM_fNull);
}

sub ignore_no_dsr {
    my $self = shift;
    if (@_) {
        if ($self->{"_N_AUX_OFF"}) {
            $self->{"_N_AUX_OFF"} &= ~FM_fDsrSensitivity;
	}
	else {
            $self->{"_N_AUX_OFF"} = ~FM_fDsrSensitivity;
	}
        if ( yes_true ( shift ) ) {
            $self->{"_N_AUX_ON"} |= FM_fDsrSensitivity;
	}
        update_DCB ($self);
    }
    else {
        return unless fetch_DCB ($self);
    }
##    printf "_BitMask=%lx\n", $self->{"_BitMask"}; ###
    return ($self->{"_BitMask"} & FM_fDsrSensitivity);
}

sub subst_pe_char {
    my $self = shift;
    if (@_) {
        if ($self->{"_N_AUX_OFF"}) {
            $self->{"_N_AUX_OFF"} &= ~FM_fErrorChar;
	}
	else {
            $self->{"_N_AUX_OFF"} = ~FM_fErrorChar;
	}
        if ( yes_true ( shift ) ) {
            $self->{"_N_AUX_ON"} |= FM_fErrorChar;
	}
        update_DCB ($self);
    }
    else {
        return unless fetch_DCB ($self);
    }
##    printf "_BitMask=%lx\n", $self->{"_BitMask"}; ###
    return ($self->{"_BitMask"} & FM_fErrorChar);
}

sub abort_on_error {
    my $self = shift;
    if (@_) {
        if ($self->{"_N_AUX_OFF"}) {
            $self->{"_N_AUX_OFF"} &= ~FM_fAbortOnError;
	}
	else {
            $self->{"_N_AUX_OFF"} = ~FM_fAbortOnError;
	}
        if ( yes_true ( shift ) ) {
            $self->{"_N_AUX_ON"} |= FM_fAbortOnError;
	}
        update_DCB ($self);
    }
    else {
        return unless fetch_DCB ($self);
    }
##    printf "_BitMask=%lx\n", $self->{"_BitMask"}; ###
    return ($self->{"_BitMask"} & FM_fAbortOnError);
}

sub output_dsr {
    my $self = shift;
    if (@_) {
        if ($self->{"_N_AUX_OFF"}) {
            $self->{"_N_AUX_OFF"} &= ~FM_fOutxDsrFlow;
	}
	else {
            $self->{"_N_AUX_OFF"} = ~FM_fOutxDsrFlow;
	}
        if ( yes_true ( shift ) ) {
            $self->{"_N_AUX_ON"} |= FM_fOutxDsrFlow;
	}
        update_DCB ($self);
    }
    else {
        return unless fetch_DCB ($self);
    }
##    printf "_BitMask=%lx\n", $self->{"_BitMask"}; ###
    return ($self->{"_BitMask"} & FM_fOutxDsrFlow);
}

sub output_cts {
    my $self = shift;
    if (@_) {
        if ($self->{"_N_AUX_OFF"}) {
            $self->{"_N_AUX_OFF"} &= ~FM_fOutxCtsFlow;
	}
	else {
            $self->{"_N_AUX_OFF"} = ~FM_fOutxCtsFlow;
	}
        if ( yes_true ( shift ) ) {
            $self->{"_N_AUX_ON"} |= FM_fOutxCtsFlow;
	}
        update_DCB ($self);
    }
    else {
        return unless fetch_DCB ($self);
    }
##    printf "_BitMask=%lx\n", $self->{"_BitMask"}; ###
    return ($self->{"_BitMask"} & FM_fOutxCtsFlow);
}

sub input_xoff {
    my $self = shift;
    if (@_) {
        if ($self->{"_N_AUX_OFF"}) {
            $self->{"_N_AUX_OFF"} &= ~FM_fInX;
	}
	else {
            $self->{"_N_AUX_OFF"} = ~FM_fInX;
	}
        if ( yes_true ( shift ) ) {
            $self->{"_N_AUX_ON"} |= FM_fInX;
	}
        update_DCB ($self);
    }
    else {
        return unless fetch_DCB ($self);
    }
##    printf "_BitMask=%lx\n", $self->{"_BitMask"}; ###
    return ($self->{"_BitMask"} & FM_fInX);
}

sub output_xoff {
    my $self = shift;
    if (@_) {
        if ($self->{"_N_AUX_OFF"}) {
            $self->{"_N_AUX_OFF"} &= ~FM_fOutX;
	}
	else {
            $self->{"_N_AUX_OFF"} = ~FM_fOutX;
	}
        if ( yes_true ( shift ) ) {
            $self->{"_N_AUX_ON"} |= FM_fOutX;
	}
        update_DCB ($self);
    }
    else {
        return unless fetch_DCB ($self);
    }
##    printf "_BitMask=%lx\n", $self->{"_BitMask"}; ###
    return ($self->{"_BitMask"} & FM_fOutX);
}

sub tx_on_xoff {
    my $self = shift;
    if (@_) {
        if ($self->{"_N_AUX_OFF"}) {
            $self->{"_N_AUX_OFF"} &= ~FM_fTXContinueOnXoff;
	}
	else {
            $self->{"_N_AUX_OFF"} = ~FM_fTXContinueOnXoff;
	}
        if ( yes_true ( shift ) ) {
            $self->{"_N_AUX_ON"} |= FM_fTXContinueOnXoff;
	}
        update_DCB ($self);
    }
    else {
        return unless fetch_DCB ($self);
    }
##    printf "_BitMask=%lx\n", $self->{"_BitMask"}; ###
    return ($self->{"_BitMask"} & FM_fTXContinueOnXoff);
}

sub dtr_active {
    return unless (@_ == 2);
    my $self = shift;
    my $onoff = yes_true ( shift ) ? SETDTR : CLRDTR ;
    return EscapeCommFunction($self->{"_HANDLE"}, $onoff);
}

sub rts_active {
    return unless (@_ == 2);
    my $self = shift;
    my $onoff = yes_true ( shift ) ? SETRTS : CLRRTS ;
    return EscapeCommFunction($self->{"_HANDLE"}, $onoff);
}

# pulse parameters

sub pulse_dtr_off {
    return unless (@_ == 2);
    my $self = shift;
    my $delay = shift;
    $self->dtr_active(0) or carp "Did not pulse DTR off";
    Win32::Sleep($delay);
    $self->dtr_active(1) or carp "Did not restore DTR on";
    Win32::Sleep($delay);
}

sub pulse_rts_off {
    return unless (@_ == 2);
    my $self = shift;
    my $delay = shift;
    $self->rts_active(0) or carp "Did not pulse RTS off";
    Win32::Sleep($delay);
    $self->rts_active(1) or carp "Did not restore RTS on";
    Win32::Sleep($delay);
}

sub pulse_break_on {
    return unless (@_ == 2);
    my $self = shift;
    my $delay = shift;
    $self->break_active(1) or carp "Did not pulse BREAK on";
    Win32::Sleep($delay);
    $self->break_active(0) or carp "Did not restore BREAK off";
    Win32::Sleep($delay);
}

sub pulse_dtr_on {
    return unless (@_ == 2);
    my $self = shift;
    my $delay = shift;
    $self->dtr_active(1) or carp "Did not pulse DTR on";
    Win32::Sleep($delay);
    $self->dtr_active(0) or carp "Did not restore DTR off";
    Win32::Sleep($delay);
}

sub pulse_rts_on {
    return unless (@_ == 2);
    my $self = shift;
    my $delay = shift;
    $self->rts_active(1) or carp "Did not pulse RTS on";
    Win32::Sleep($delay);
    $self->rts_active(0) or carp "Did not restore RTS off";
    Win32::Sleep($delay);
}

sub break_active {
    return unless (@_ == 2);
    my $self = shift;
    my $onoff = yes_true ( shift ) ? SETBREAK : CLRBREAK ;
    return EscapeCommFunction($self->{"_HANDLE"}, $onoff);
}

sub xon_active {
    return unless (@_ == 1);
    my $self = shift;
    return EscapeCommFunction($self->{"_HANDLE"}, SETXON);
}

sub xoff_active {
    return unless (@_ == 1);
    my $self = shift;
    return EscapeCommFunction($self->{"_HANDLE"}, SETXOFF);
}

sub is_modemlines {
    return unless (@_ == 1);
    my $self = shift;
    my $mstat = " " x4;
    unless ( GetCommModemStatus($self->{"_HANDLE"}, $mstat) ) {
        carp "Error in GetCommModemStatus";
        return;
    }
    my $result = unpack ("L", $mstat);
    return $result;
}

sub debug_comm {
    my $self = shift;
    if (ref($self))  {
        if (@_) { $self->{"_DEBUG_C"} = yes_true ( shift ); }
        else {
            nocarp or carp "Debug level: $self->{NAME} = $self->{\"_DEBUG_C\"}";
            return $self->{"_DEBUG_C"};
        }
    } else {
        $Babble = yes_true ($self);
        nocarp or carp "CommPort Debug Class = $Babble";
        return $Babble;
    }
}

sub close {
    my $self = shift;
    my $ok;
    my $success = 1;

return unless (defined $self->{NAME});

if ($Babble) {
        carp "Closing $self " . $self->{NAME};
    }
    if ($self->{"_HANDLE"}) {
        purge_all ($self);
        update_timeouts ($self);			# if any running ??
        $ok=CloseHandle($self->{"_HANDLE"});
        if (! $ok) {
            print "Error Closing handle $self->{\"_HANDLE\"} for $self->{NAME}\n";
            OS_Error;
	    $success = 0;
        }
        elsif ($Babble) {
            print "Closing Device handle $self->{\"_HANDLE\"} for $self->{NAME}\n";
        }
        $self->{"_HANDLE"} = undef;
    }
    if ($self->{"_R_EVENT"}) {
        $ok=CloseHandle($self->{"_R_EVENT"});
        if (! $ok) {
            print "Error closing Read Event handle $self->{\"_R_EVENT\"} for $self->{NAME}\n";
            OS_Error;
	    $success = 0;
        }
        $self->{"_R_EVENT"} = undef;
    }
    if ($self->{"_W_EVENT"}) {
        $ok=CloseHandle($self->{"_W_EVENT"});
        if (! $ok) {
            print "Error closing Write Event handle $self->{\"_W_EVENT\"} for $self->{NAME}\n";
            OS_Error;
	    $success = 0;
        }
        $self->{"_W_EVENT"} = undef;
    }
    $self->{NAME} = undef;
    if ($Babble) {
        printf "CommPort close result:%d\n", $success;
    }
    return $success;
}

sub DESTROY {
    my $self = shift;
    return unless (defined $self->{NAME});

if ($Babble or $self->{"_DEBUG_C"}) {
        print "Destroying $self->{NAME}\n" if (defined $self->{NAME});
    }
    $self->close;
}

1;  # so the require or use succeeds

# Autoload methods go after =cut, and are processed by the autosplit program.

__END__

=pod

=head1 NAME

Win32API::CommPort - Raw Win32 system API calls for serial communications.

=head1 SYNOPSIS

use Win32;	## not required under all circumstances
  require 5.006;
  use Win32API::CommPort qw( :PARAM :STAT 0.20 );

## when available ##  use Win32API::File 0.07 qw( :ALL );

=head2 Constructors

$PortObj = new Win32API::CommPort ($PortName, $quiet)
       || die "Can't open $PortName: $^E\n";    # $quiet is optional

@required = qw( BAUD DATA STOP );
  $faults = $PortObj->initialize(@required);
  if ($faults) { die "Required parameters not set before initialize\n"; }

=head2 Configuration Utility Methods

set_no_messages(1);			# test suite use

# exported by :PARAM
  nocarp || carp "Something fishy";
  $a = SHORTsize;			# 0xffff
  $a = LONGsize;			# 0xffffffff
  $answer = yes_true("choice");		# 1 or 0
  OS_Error unless ($API_Call_OK);	# prints error

$PortObj->init_done  || die "Not done";

$PortObj->fetch_DCB  || die "Not done";
  $PortObj->update_DCB || die "Not done";

$milliseconds = $PortObj->get_tick_count;

=head2 Capability Methods (read only)

# true/false capabilities
  $a = $PortObj->can_baud;     	# else fixed
  $a = $PortObj->can_databits;
  $a = $PortObj->can_stopbits;
  $a = $PortObj->can_dtrdsr;
  $a = $PortObj->can_handshake;
  $a = $PortObj->can_parity_check;
  $a = $PortObj->can_parity_config;
  $a = $PortObj->can_parity_enable;
  $a = $PortObj->can_rlsd;    	 # receive line signal detect (carrier)
  $a = $PortObj->can_rlsd_config;
  $a = $PortObj->can_16bitmode;
  $a = $PortObj->can_ioctl;	# false, unix only
  $a = $PortObj->is_rs232;
  $a = $PortObj->is_modem;
  $a = $PortObj->can_rtscts;
  $a = $PortObj->can_xonxoff;
  $a = $PortObj->can_xon_char;
  $a = $PortObj->can_spec_char;
  $a = $PortObj->can_interval_timeout;
  $a = $PortObj->can_total_timeout;

# list output capabilities
  ($rmax, $wmax) = $PortObj->buffer_max;
  ($rbuf, $wbuf) = $PortObj->are_buffers;	# current
  @choices = $PortObj->are_baudrate;		# legal values
  @choices = $PortObj->are_handshake;
  @choices = $PortObj->are_parity;
  @choices = $PortObj->are_databits;
  @choices = $PortObj->are_stopbits;

=head2 Configuration Methods

# most methods can be called two ways:
  $PortObj->is_handshake("xoff");           # set parameter
  $flowcontrol = $PortObj->is_handshake;    # current value (scalar)

# similar
  $PortObj->is_baudrate(9600);
  $PortObj->is_parity("odd");
  $PortObj->is_databits(8);
  $PortObj->is_stopbits(1);
  $PortObj->debug_comm(0);
  $PortObj->is_xon_limit(100);      # bytes left in buffer
  $PortObj->is_xoff_limit(100);     # space left in buffer
  $PortObj->is_xon_char(0x11);
  $PortObj->is_xoff_char(0x13);
  $PortObj->is_eof_char(0x0);
  $PortObj->is_event_char(0x0);
  $PortObj->is_error_char(0);       # for parity errors

$rbuf = $PortObj->is_read_buf;    # read_only except internal use
  $wbuf = $PortObj->is_write_buf;
  $size = $PortObj->internal_buffer;

$PortObj->is_buffers(4096, 4096);  # read, write
	# returns current in list context

$PortObj->is_read_interval(100);    # max time between read char (millisec)
  $PortObj->is_read_char_time(5);     # avg time between read char
  $PortObj->is_read_const_time(100);  # total = (avg * bytes) + const
  $PortObj->is_write_char_time(5);
  $PortObj->is_write_const_time(100);

$PortObj->is_binary(T);		# just say Yes (Win 3.x option)
  $PortObj->is_parity_enable(F);	# faults during input

=head2 Operating Methods

($BlockingFlags, $InBytes, $OutBytes, $LatchErrorFlags) = $PortObj->is_status
	|| warn "could not get port status\n";

$ClearedErrorFlags = $PortObj->reset_error;
        # The API resets errors when reading status, $LatchErrorFlags
	# is all $ErrorFlags since they were last explicitly cleared

if ($BlockingFlags) { warn "Port is blocked"; }
  if ($BlockingFlags & BM_fCtsHold) { warn "Waiting for CTS"; }
  if ($LatchErrorFlags & CE_FRAME) { warn "Framing Error"; }

Additional useful constants may be exported eventually.

$count_in = $PortObj->read_bg($InBytes);
  ($done, $count_in, $string_in) = $PortObj->read_done(1);
	# background read with wait until done

$count_out = $PortObj->write_bg($output_string);	# background write
  ($done, $count_out) = $PortObj->write_done(0);

$PortObj->suspend_tx;			# output from write buffer
  $PortObj->resume_tx;
  $PortObj->xmit_imm_char(0x03);	# bypass buffer (and suspend)

$PortObj->xoff_active;		# simulate received xoff
  $PortObj->xon_active;			# simulate received xon

$PortObj->purge_all;
  $PortObj->purge_rx;
  $PortObj->purge_tx;

# controlling outputs from the port
  $PortObj->dtr_active(T);		# sends outputs direct to hardware
  $PortObj->rts_active(Yes);		# returns status of API call
  $PortObj->break_active(N);		# NOT state of bit

$PortObj->pulse_break_on($milliseconds); # off version is implausible
  $PortObj->pulse_rts_on($milliseconds);
  $PortObj->pulse_rts_off($milliseconds);
  $PortObj->pulse_dtr_on($milliseconds);
  $PortObj->pulse_dtr_off($milliseconds);
      # sets_bit, delays, resets_bit, delays

$ModemStatus = $PortObj->is_modemlines;
  if ($ModemStatus & $PortObj->MS_RLSD_ON) { print "carrier detected"; }

$PortObj->close || die;
      # "undef $PortObj" preferred unless reopening port
      # "close" should precede "undef" if both used

=head1 DESCRIPTION

This provides fairly low-level access to the Win32 System API calls
dealing with serial ports.

Uses features of the Win32 API to implement non-blocking I/O, serial
parameter setting, event-loop operation, and enhanced error handling.

To pass in C<NULL> as the pointer to an optional buffer, pass in C<$null=0>.
This is expected to change to an empty list reference, C<[]>, when Perl
supports that form in this usage.

Beyond raw access to the API calls and related constants, this module
will eventually handle smart buffer allocation and translation of return
codes.

=head2 Initialization

The constructor is B<new> with a F<PortName> (as the Registry
knows it) specified. This will do a B<CreateFile>, get the available
options and capabilities via the Win32 API, and create the object.
The port is not yet ready for read/write access. First, the desired
I<parameter settings> must be established. Since these are tuning
constants for an underlying hardware driver in the Operating System,
they should all checked for validity by the method calls that set them.
The B<initialize> method takes a list of required parameters and confirms
they have been set. For others, it will attempt to deduce defaults from
the hardware or from other parameters. The B<initialize> method returns
the number of faults (zero if the port is setup ok). The B<update_DCB>
method writes a new I<Device Control Block> to complete the startup and
allow the port to be used. Ports are opened for binary transfers. A
separate C<binmode> is not needed. The USER must release the object
if B<initialize> or B<update_DCB> does not succeed.

Version 0.15 adds an optional C<$quiet> parameter to B<new>. Failure
to open a port prints a error message to STDOUT by default. Since only
one application at a time can "own" the port, one source of failure was
"port in use". There was previously no way to check this without getting
a "fail message". Setting C<$quiet> disables this built-in message. It
also returns 0 instead of C<undef> if the port is unavailable (still FALSE,
used for testing this condition - other faults may still return C<undef>).
Use of C<$quiet> only applies to B<new>.

The fault checking in B<initialize> consists in verifying an I<_N_$item>
internal variable exists for each I<$item> in the input list. The
I<_N_$item> is created for each parameter that is set either directly
or by default. A derived class must create the I<_N_$items> for any
varibles it adds to the base class if it wants B<initialize> to check
them. Win32API::CommPort supports the following:

$item		_N_$item	    setting method
	------		---------	    --------------
	BAUD		"_N_BAUD"	    is_baudrate
	BINARY		"_N_BINARY"	    is_binary
	DATA		"_N_DATA"	    is_databits
	EOFCHAR		"_N_EOFCHAR"	    is_eof_char
	ERRCHAR		"_N_ERRCHAR"	    is_error_char
	EVTCHAR		"_N_EVTCHAR"	    is_event_char
	HSHAKE		"_N_HSHAKE"	    is_handshake
	PARITY		"_N_PARITY"	    is_parity
	PARITY_EN	"_N_PARITY_EN"	    is_parity_enable
	RCONST		"_N_RCONST"	    is_read_const_time
	READBUF		"_N_READBUF"	    is_read_buf
	RINT		"_N_RINT"	    is_read_interval
	RTOT		"_N_RTOT"	    is_read_char_time
	STOP		"_N_STOP"	    is_stopbits
	WCONST		"_N_WCONST"	    is_write_const_time
	WRITEBUF	"_N_WRITEBUF"	    is_write_buf
	WTOT		"_N_WTOT"	    is_write_char_time
	XOFFCHAR	"_N_XOFFCHAR"	    is_xoff_char
	XOFFLIM		"_N_XOFFLIM"	    is_xoff_limit
	XONCHAR		"_N_XONCHAR"	    is_xon_char
	XONLIM		"_N_XONLIM"	    is_xon_limit

Some individual parameters (eg. baudrate) can be changed after the
initialization is completed. These will automatically update the
I<Device Control Block> as required. The I<init_done> method indicates
when I<initialize> has completed successfully.

$PortObj = new Win32API::CommPort ($PortName, $quiet)
       || die "Can't open $PortName: $^E\n";    # $quiet is optional

if $PortObj->can_databits { $PortObj->is_databits(8) };
  $PortObj->is_baudrate(9600);
  $PortObj->is_parity("none");
  $PortObj->is_stopbits(1);
  $PortObj->is_handshake("rts");
  $PortObj->is_buffers(4096, 4096);
  $PortObj->dtr_active(T);

@required = qw( BAUD DATA STOP PARITY );
  $PortObj->initialize(@required) || undef $PortObj;

$PortObj->dtr_active(f);
  $PortObj->is_baudrate(300);

$PortObj->close || die;
      # "undef $PortObj" preferred unless reopening port
      # "close" should precede "undef" if both used

undef $PortObj;  # closes port AND frees memory in perl

The F<PortName> maps to both the Registry I<Device Name> and the
I<Properties> associated with that device. A single I<Physical> port
can be accessed using two or more I<Device Names>. But the options
and setup data will differ significantly in the two cases. A typical
example is a Modem on port "COM2". Both of these F<PortNames> open
the same I<Physical> hardware:

$P1 = new Win32API::CommPort ("COM2");

$P2 = new Win32API::CommPort ("\\\\.\\Nanohertz Modem model K-9");

$P1 is a "generic" serial port. $P2 includes all of $P1 plus a variety
of modem-specific added options and features. The "raw" API calls return
different size configuration structures in the two cases. Win32 uses the
"\\.\" prefix to identify "named" devices. Since both names use the same
I<Physical> hardware, they can not both be used at the same time. The OS
will complain. Consider this A Good Thing.

Version 0.16 adds B<pulse> methods for the I<RTS, BREAK, and DTR> bits. The
B<pulse> methods assume the bit is in the opposite state when the method
is called. They set the requested state, delay the specified number of
milliseconds, set the opposite state, and again delay the specified time.
These methods are designed to support devices, such as the X10 "FireCracker"
control and some modems, which require pulses on these lines to signal
specific events or data.

$PortObj->pulse_break_on($milliseconds);
  $PortObj->pulse_rts_on($milliseconds);
  $PortObj->pulse_rts_off($milliseconds);
  $PortObj->pulse_dtr_on($milliseconds);
  $PortObj->pulse_dtr_off($milliseconds);

Version 0.16 also adds I<experimental> support for the rest of the option bits
available through the I<Device Control Block>. They have not been extensively
tested and these settings are NOT saved in the B<configuration file> by
I<Win32::SerialPort>. Please let me know if one does not work as advertised.
[Win32 API bit designation]

$PortObj->ignore_null(0);	# discard \000 bytes on input [fNull]

$PortObj->ignore_no_dsr(0);	# discard input bytes unless DSR
                                # [fDsrSensitivity]

$PortObj->subst_pe_char(0);   # replace parity errors with B<is_error_char>
                                # when B<is_parity_enable> [fErrorChar]

$PortObj->abort_on_error(0);  # cancel read/write [fAbortOnError]

# next one set by $PortObj->is_handshake("dtr");
  $PortObj->output_dsr(0);	# use DSR handshake on output [fOutxDsrFlow]

# next one set by $PortObj->is_handshake("rts");
  $PortObj->output_cts(0);	# use CTS handshake on output [fOutxCtsFlow]

# next two set by $PortObj->is_handshake("xoff");
  $PortObj->input_xoff(0);	# use Xon/Xoff handshake on input [fInX]
  $PortObj->output_xoff(0);	# use Xon/Xoff handshake on output [fOutX]

$PortObj->tx_on_xoff(0);	# continue output even after input xoff sent
				# [fTXContinueOnXoff]

The B<get_tick_count> method is a wrapper around the I<Win32::GetTickCount()>
function. It matches a corresponding method in I<Device::SerialPort> which
does not have access to the I<Win32::> namespace. It still returns time
in milliseconds - but can be used in cross-platform scripts.

=head2 Configuration and Capability Methods

The Win32 Serial Comm API provides extensive information concerning
the capabilities and options available for a specific port (and
instance). "Modem" ports have different capabilties than "RS-232"
ports - even if they share the same Hardware. Many traditional modem
actions are handled via TAPI. "Fax" ports have another set of options -
and are accessed via MAPI. Yet many of the same low-level API commands
and data structures are "common" to each type ("Modem" is implemented
as an "RS-232" superset). In addition, Win95 supports a variety of
legacy hardware (e.g fixed 134.5 baud) while WinNT has hooks for ISDN,
16-data-bit paths, and 256Kbaud.

=over 8

Binary selections will accept as I<true> any of the following:
C<("YES", "Y", "ON", "TRUE", "T", "1", 1)> (upper/lower/mixed case)
Anything else is I<false>.

There are a large number of possible configuration and option parameters.
To facilitate checking option validity in scripts, most configuration
methods can be used in two different ways:

=item method called with an argument

The parameter is set to the argument, if valid. An invalid argument
returns I<false> (undef) and the parameter is unchanged. After B<init_done>,
the port will be updated immediately if allowed. Otherwise, the value
will be applied when B<update_DCB> is called.

=item method called with no argument in scalar context

The current value is returned. If the value is not initialized either
directly or by default, return "undef" which will parse to I<false>.
For binary selections (true/false), return the current value. All
current values from "multivalue" selections will parse to I<true>.
Current values may differ from requested values until B<init_done>.
There is no way to see requests which have not yet been applied.
Setting the same parameter again overwrites the first request. Test
the return value of the setting method to check "success".

=item Asynchronous (Background) I/O

This version now handles Polling (do if Ready), Synchronous (block until
Ready), and Asynchronous Modes (begin and test if Ready) with the timeout
choices provided by the API. No effort has yet been made to interact with
Windows events. But background I/O has been used successfully with the
Perl Tk modules and callbacks from the event loop.

=item Timeouts

The API provides two timing models. The first applies only to reading and
essentially determines I<Read Not Ready> by checking the time between
consecutive characters. The B<ReadFile> operation returns if that time
exceeds the value set by B<is_read_interval>. It does this by timestamping
each character. It appears that at least one character must by received in
I<every> B<read> I<call to the API> to initialize the mechanism. The timer
is then reset by each succeeding character. If no characters are received,
the read will block indefinitely.

Setting B<is_read_interval> to C<0xffffffff> will do a non-blocking read.
The B<ReadFile> returns immediately whether or not any characters are
actually read. This replicates the behavior of the API.

The other model defines the total time allowed to complete the operation.
A fixed overhead time is added to the product of bytes and per_byte_time.
A wide variety of timeout options can be defined by selecting the three
parameters: fixed, each, and size.

Read_Total = B<is_read_const_time> + (B<is_read_char_time> * bytes_to_read)

Write_Total = B<is_write_const_time> + (B<is_write_char_time> * bytes_to_write)

When reading a known number of characters, the I<Read_Total> mechanism is
recommended. This mechanism I<MUST> be used with
I<Win32::SerialPort tied FileHandles> because the tie methods can make
multiple internal API calls. The I<Read_Interval> mechanism is suitable for
a B<read_bg> method that expects a response of variable or unknown size. You
should then also set a long I<Read_Total> timeout as a "backup" in case
no bytes are received.

=back

=head2 Exports

Nothing is exported by default. The following tags can be used to have
large sets of symbols exported:

=over 4

=item :PARAM

Utility subroutines and constants for parameter setting and test:

LONGsize	SHORTsize	nocarp		yes_true
	OS_Error	internal_buffer

=item :STAT

Serial communications status constants. Included are the constants for
ascertaining why a transmission is blocked:

BM_fCtsHold	BM_fDsrHold	BM_fRlsdHold	BM_fXoffHold
	BM_fXoffSent	BM_fEof		BM_fTxim	BM_AllBits

Which incoming bits are active:

MS_CTS_ON	MS_DSR_ON	MS_RING_ON	MS_RLSD_ON

What hardware errors have been detected:

CE_RXOVER	CE_OVERRUN	CE_RXPARITY	CE_FRAME
	CE_BREAK	CE_TXFULL	CE_MODE

Offsets into the array returned by B<status:>

ST_BLOCK	ST_INPUT	ST_OUTPUT	ST_ERROR

=item :RAW

The constants and wrapper methods for low-level API calls. Details of
these methods may change with testing. Some may be inherited from
Win32API::File when that becomes available.

$result=ClearCommError($handle, $Error_BitMask_p, $CommStatus);
  $result=ClearCommBreak($handle);
  $result=SetCommBreak($handle);
  $result=GetCommModemStatus($handle, $ModemStatus);
  $result=GetCommProperties($handle, $CommProperties);
  $result=GetCommState($handle, $DCB_Buffer);
  $result=SetCommState($handle, $DCB_Buffer);
  $result=SetupComm($handle, $in_buf_size, $out_buf_size);
  $result=ReadFile($handle, $buffer, $wanted, $got, $template);
  $result=WriteFile($handle, $buffer, $size, $count, $template);

$result=GetCommTimeouts($handle, $CommTimeOuts);
  $result=SetCommTimeouts($handle, $CommTimeOuts);
  $result=EscapeCommFunction($handle, $Func_ID);
  $result=GetCommConfig($handle, $CommConfig, $Size);
  $result=SetCommConfig($handle, $CommConfig, $Size);
  $result=PurgeComm($handle, $flags);

$result=GetCommMask($handle, $Event_Bitmask);
  $result=SetCommMask($handle, $Event_Bitmask);
  $hEvent=CreateEvent($security, $reset_req, $initial, $name);
  $handle=CreateFile($file, $access, $share, $security,
                     $creation, $flags, $template);
  $result=CloseHandle($handle);
  $result=ResetEvent($hEvent);
  $result=TransmitCommChar($handle, $char);
  $result=WaitCommEvent($handle, $Event_Bitmask, $lpOverlapped);
  $result=GetOverlappedResult($handle, $lpOverlapped, $count, $bool);

Flags used by B<PurgeComm:>

PURGE_TXABORT	PURGE_RXABORT	PURGE_TXCLEAR	PURGE_RXCLEAR

Function IDs used by EscapeCommFunction:

SETXOFF		SETXON		SETRTS		CLRRTS
	SETDTR		CLRDTR		SETBREAK	CLRBREAK

Events used by B<WaitCommEvent:>

EV_RXCHAR	EV_RXFLAG	EV_TXEMPTY	EV_CTS
	EV_DSR		EV_RLSD		EV_BREAK	EV_ERR
	EV_RING		EV_PERR		EV_RX80FULL	EV_EVENT1
	EV_EVENT2

Errors specific to B<GetOverlappedResult:>

ERROR_IO_INCOMPLETE	ERROR_IO_PENDING

=item :COMMPROP

The constants for the I<CommProperties structure> returned by
B<GetCommProperties>. Included mostly for completeness.

BAUD_USER	BAUD_075	BAUD_110	BAUD_134_5
	BAUD_150	BAUD_300	BAUD_600	BAUD_1200
	BAUD_1800	BAUD_2400	BAUD_4800	BAUD_7200
	BAUD_9600	BAUD_14400	BAUD_19200	BAUD_38400
	BAUD_56K	BAUD_57600	BAUD_115200	BAUD_128K

PST_FAX		PST_LAT		PST_MODEM	PST_PARALLELPORT
	PST_RS232	PST_RS422	PST_X25		PST_NETWORK_BRIDGE
	PST_RS423	PST_RS449	PST_SCANNER	PST_TCPIP_TELNET
	PST_UNSPECIFIED

PCF_INTTIMEOUTS		PCF_PARITY_CHECK	PCF_16BITMODE
	PCF_DTRDSR		PCF_SPECIALCHARS	PCF_RLSD
	PCF_RTSCTS		PCF_SETXCHAR		PCF_TOTALTIMEOUTS
	PCF_XONXOFF

SP_BAUD		SP_DATABITS	SP_HANDSHAKING	SP_PARITY
	SP_RLSD		SP_STOPBITS	SP_SERIALCOMM	SP_PARITY_CHECK

DATABITS_5	DATABITS_6	DATABITS_7	DATABITS_8
	DATABITS_16	DATABITS_16X

STOPBITS_10	STOPBITS_15	STOPBITS_20

PARITY_SPACE	PARITY_NONE	PARITY_ODD	PARITY_EVEN
	PARITY_MARK

COMMPROP_INITIALIZED

=item :DCB

The constants for the I<Device Control Block> returned by B<GetCommState>
and updated by B<SetCommState>. Again, included mostly for completeness.
But there are some combinations of "FM_f" settings which are not currently
supported by high-level commands. If you need one of those, please report
the lack as a bug.

CBR_110		CBR_300		CBR_600		CBR_1200
	CBR_2400	CBR_4800	CBR_9600	CBR_14400
	CBR_19200	CBR_38400	CBR_56000	CBR_57600
	CBR_115200	CBR_128000	CBR_256000

DTR_CONTROL_DISABLE	DTR_CONTROL_ENABLE	DTR_CONTROL_HANDSHAKE
	RTS_CONTROL_DISABLE	RTS_CONTROL_ENABLE	RTS_CONTROL_HANDSHAKE
	RTS_CONTROL_TOGGLE

EVENPARITY	MARKPARITY	NOPARITY	ODDPARITY
	SPACEPARITY

ONESTOPBIT	ONE5STOPBITS	TWOSTOPBITS

FM_fBinary		FM_fParity		FM_fOutxCtsFlow
	FM_fOutxDsrFlow		FM_fDtrControl		FM_fDsrSensitivity
	FM_fTXContinueOnXoff	FM_fOutX		FM_fInX
	FM_fErrorChar		FM_fNull		FM_fRtsControl
	FM_fAbortOnError	FM_fDummy2

=item :ALL

All of the above. Except for the I<test suite>, there is not really a good
reason to do this.

=back

=head1 NOTES

The object returned by B<new> is NOT a I<Filehandle>. You
will be disappointed if you try to use it as one.

e.g. the following is WRONG!!____C<print $PortObj "some text";>

I<Win32::SerialPort> supports accessing ports via I<Tied Filehandles>.

An important note about Win32 filenames. The reserved device names such
as C< COM1, AUX, LPT1, CON, PRN > can NOT be used as filenames. Hence
I<"COM2.cfg"> would not be usable for B<$Configuration_File_Name>.

This module uses Win32::API extensively. The raw API calls are B<very>
unforgiving. You will certainly want to start perl with the B<-w> switch.
If you can, B<use strict> as well. Try to ferret out all the syntax and
usage problems BEFORE issuing the API calls (many of which modify tuning
constants in hardware device drivers....not where you want to look for bugs).

Thanks to Ken White for testing on NT.

=head1 KNOWN LIMITATIONS

The current version of the module has been designed for testing using
the ActiveState and Core (GS 5.004_02) ports of Perl for Win32 without
requiring a compiler or using XS. In every case, compatibility has been
selected over performance. Since everything is (sometimes convoluted but
still pure) Perl, you can fix flaws and change limits if required. But
please file a bug report if you do. This module has been tested with
each of the binary perl versions for which Win32::API is supported: AS
builds 315, 316, and 500-509 and GS 5.004_02. It has only been tested on
Intel hardware.

=over 4

=item Tutorial

With all the options, this module needs a good tutorial. It doesn't
have a complete one yet. A I<"How to get started"> tutorial appeared
B<The Perl Journal #13> (March 1999). The demo programs are a good
starting point for additional examples.

=item Buffers

The size of the Win32 buffers are selectable with B<is_buffers>. But each read
method currently uses a fixed internal buffer of 4096 bytes. This can be
changed in the module source. The read-only B<internal_buffer> method will
give the current size. There are other fixed internal buffers as well. But
no one has needed to change those. The XS version will support dynamic buffer
sizing.

=item Modems

Lots of modem-specific options are not supported. The same is true of
TAPI, MAPI. I<API Wizards> are welcome to contribute.

=item API Options

Lots of options are just "passed through from the API". Some probably
shouldn't be used together. The module validates the obvious choices when
possible. For something really fancy, you may need additional API
documentation. Available from I<Micro$oft Pre$$>.

=back

=head1 BUGS

ActiveState ports of Perl for Win32 before build 500 do not support the
tools for building extensions and so will not support later versions of
this extension. In particular, the automated install and test scripts in
this distribution work differently with ActiveState builds 3xx.

There is no parameter checking on the "raw" API calls. You probably should
be familiar with using the calls in "C" before doing much experimenting.

On Win32, a port must B<close> before it can be reopened again by the same
process. If a physical port can be accessed using more than one name (see
above), all names are treated as one. The perl script can also be run
multiple times within a single batch file or shell script. The I<Makefile.PL>
spawns subshells with backticks to run the test suite on Perl 5.003 - ugly,
but it works.

On NT, a B<read_done> or B<write_done> returns I<False> if a background
operation is aborted by a purge. Win95 returns I<True>.

A few NT systems seem to set B<can_parity_enable> true, but do not actually
support setting B<is_parity_enable>. This may be a characteristic of certain
third-party serial drivers. Or a Microsoft bug. I have been able to
reproduce it on my system, but not identify a specific cause.

__Please send comments and bug reports to wcbirthisel@alum.mit.edu.

=head1 AUTHORS

Bill Birthisel, wcbirthisel@alum.mit.edu, http://members.aol.com/Bbirthisel/.

Tye McQueen contributed but no longer supports these modules.

=head1 SEE ALSO

Wi32::SerialPort - High-level user interface/front-end for this module

Win32API::File I<when available>

Win32::API - Aldo Calpini's "Magic", http://www.divinf.it/dada/perl/

Perltoot.xxx - Tom (Christiansen)'s Object-Oriented Tutorial

=head1 COPYRIGHT

This module is free software; you can redistribute it and/or modify it
under the same terms as Perl itself.

=head2 COMPATIBILITY

Most of the code in this module has been stable since version 0.12.
Version 0.20 adds explicit support for COM10++ and USB - although the
functionality existed before. Perl ports before 5.6.0 are no longer
supported for test or install. The modules themselves work with 5.003.
1 April 2010.

=cut

${this.title}

Code Editor : CommPort.pm